3g white screen protector?

[iconone]

I did a quick search and found nothing.
I am looking for a white screen protector for the 3g not a case. I want to make the front all white. I dont know why apple didnt do it why have a black front with a white back i dont know let my know if you know where to find one.

[S-Man]

Do you mean covering all the black areas, (like around the earpiece and home button) with white?
Because I think covering the screen itself with white would make the screen un-usable...

[iconone]

Do you mean covering all the black areas, (like around the earpiece and home button) with white?
Because I think covering the screen itself with white would make the screen un-usable...

Yeah only on the black so its all white but not the screen like you said that would be un usable.

[S-Man]

I've never seen them make it, but with a white iPhone, that would be pretty sweet. You could put cut vinyl on there. Perhaps a full screen protector, then white cut vinyl on top of that.
i have a white iPhone but I have a black Case-Mate, so it looks black. If I didn't have a case, I'd definitly try this to make it all white. That would be cool!

[iconone]

I've never seen them make it, but with a white iPhone, that would be pretty sweet. You could put cut vinyl on there. Perhaps a full screen protector, then white cut vinyl on top of that.
i have a white iPhone but I have a black Case-Mate, so it looks black. If I didn't have a case, I'd definitly try this to make it all white. That would be cool!

Thats what i want but cant find it i might just have 2 make it and then sell it.

[S-Man]

True-Dat!
Do you have a plotter?
I have a plotter and cut vinyl graphics and decals for clients. (sign business)
I might make one for my phone...
Cool, you're in Clear Lake, I'm in NW Houston.

The only problem I see with vinyl is proper alignment. Unless it was applied to the static-cling screen-protector before-hand and applied as one unit...hmm....

[iconone]

No I have none of that you sound like the man for the job. Haha. I would prob put aclear screen protector on first then make it in 3 parts top bottom and then the sides. But idk you have done the sticker/ graphics alot more than I have done it me being 0 times. If you figure it out let me know I would love get one from you. I just wonder about the glue on the sticker when you try to take it off.

[S-Man]

Yeah, I wouldn't recommend applying vinyl directly to the glass, it can be difficult to remove, and when it does come off, it leaves glue behind that has to be removed with solvents or powerful citrus-based adhesive removers.
I would most likely scan the front of the phone, or perhaps the screen protector, then cut and apply to the screen protector and then apply the screen protector to the phone so that the vinyl isn't directly applied to the glass. I could try and whip something out tomorrow...

[iconone]

Yeah do that let me know. Thanks

[S-Man]

This is what I have so far. It would be much better to scan the clear screen cover and apply it to that. I haven't applied it to my phone because I don't want to apply it directly to the glass. I don't have any screen protectors either. Maybe I'll order a 3-pack or something. Looks promising so far...
http://slickpix.smugmug.com/photos/369299200_5F8bP-L.jpg

[iconone]

wow that looks kick ass how close is the white to the iPhone white?

[S-Man]

I forgot to check before I left the shop, (I'm at home now) but under my incandescent light here at home it looks about spot on. As close as it is, it would be fine given the chrome bezel as the divider and the fact that its two different sides. i.e. you don't see both sides at the same time.
Where can I get some full-screen-covers for cheap? (I prefer the non-adhesive cling-type sheets)

[iconone]

My brother has a v1 with a full screen protector but he got it with a case at the apple store. I'll look online at work but I bet the apple store has them.

[miggs1310]

Wow, I think this is a great thread. One member has an idea and another member helps him realize that idea. This is really cool, kinda makes me feel all warm and fuzzy inside. There are some great people here.

[S-Man]

I just ordered 2 matte screen covers and 2 clear screen covers. We'll see how they turn out. I should get them this week. Stay tuned!

These HERE: http://www.dealextreme.com/details.dx/sku.14400

Are they any good? (too late! I already ordered! hah)

(edit: Nice avatar miggs...but I'm afraid I must say: go Texans! yay-YAY!)

[iconone]

sweet. Dont know which one I have on mine.

[iconone]

found this on yahoo images if the link dosent work go to yahoo images and type in iphone 3g white
http://images.search.yahoo.com/images/view?back=http%3A%2F%2Fimages.search.yahoo.com%2Fs earch%2Fimages%3Fei%3DUTF-8%26p%3Diphone%25203g%2520white%26vm%3Dr%26fr2%3Dt ab-web%26fr%3Dyfp-t-501&w=500&h=375&imgurl=static.flickr.com%2F3192%2F2703316736_a603c 0a0e9.jpg&rurl=http%3A%2F%2Fwww.flickr.com%2Fphotos%2Feric-rihlmann%2F2703316736%2F&size=136.5kB&name=All+White+iPhone+3G&p=iphone+3g+white&type=JPG&oid=df9a106e024b5856&fusr=Eric+Rihlmann&tit=All+White+iPhone+3G&hurl=http%3A%2F%2Fwww.flickr.com%2Fphotos%2Feric-rihlmann%2F&no=17&tt=720&sigr=11mq5bifj&sigi=11gk7sopn&sigb=139r96g3o&sigh=11bjcntru

[S-Man]

yikes...that looks like white cardboard taped to the face...Look at how thick it is! I can see it hanging over the ridges! Methinks that is a bootleg applique...

[iconone]

yikes...that looks like white cardboard taped to the face...Look at how thick it is! I can see it hanging over the ridges! Methinks that is a bootleg applique...

Yeah it does but its the thought that counts. haha

[kokogirl]

You guys have a great idea here! I think you could sell them. I have a white 3G and I think they will look really good. But will the white vinyl cover/conceal the sensors at the top?

[S-Man]

You guys have a great idea here! I think you could sell them. I have a white 3G and I think they will look really good. But will the white vinyl cover/conceal the sensors at the top?

DOH!
Good observation...I didn't think of that. It probably would block the sensors...F-Word!

[iconone]

DOH!
Good observation...I didn't think of that. It probably would block the sensors...F-Word!

What sensors are yall talking about?

[kokogirl]

I think you guys got excited about the looks and not the functionality. It is a good idea though. Maybe you can figure out how to burn a couple holes up there in the vinyl.

iconone-there are proximity and light sensors are the top near where you out your ear. Look in the light and you will see red circle looking things up there. I tried to google you a pic, but I cannot find one easily.

[S-Man]

I could cut a little oval hole in it like on this case mate case. I think that's what I'll do.
Image courtesy user: "Inverted"
http://i36.tinypic.com/9sfpu1.jpg

[Ctgry5]

This is what I have so far. It would be much better to scan the clear screen cover and apply it to that. I haven't applied it to my phone because I don't want to apply it directly to the glass. I don't have any screen protectors either. Maybe I'll order a 3-pack or something. Looks promising so far...
http://slickpix.smugmug.com/photos/369299200_5F8bP-L.jpg

S-Man... you have your first customer here.....Let me know...

[S-Man]

I just got an email today saying that my order(which I placed 2 days ago) has finally shipped and it takes 7-10 days to come from hong kong. I'll have a final draft not long after that. I think it'll be sweet because I can make them any color I want and even have photo-quality digital prints, too...

[iconone]

S-man I know you are in Houston how is your house and the fam doing? I still haven't lost power and the eye went right over us. The crazyest thing I have ever seen/ been in.

[S-Man]

we're good. Lots of downed tres and some structure damage, but my home is safe as is all family. Thanks for askng. I was hopin the eye would pass over me but no dice. It was kind of fun. I'm hungry now and we don't have power. I wonder how long it's going to be out. How did you guys fare in clear lake?
Oh and I'm using the 3g now. Can't use computer.

[iconone]

Yeah the eye went over us 2 but never lost power the cable and Internet just went out at about 8am so I'm on the 3g as well. I'm hungry but don't want to cook anything I hope something will open up

[kokogirl]

I am glad you 2 are ok. Try a Chinese restaurant. The only place cookiing food using a generator for power was a Chinese restaurant when Jean or Charlie came through here a few years ago.

[Ramesh]

Good to hear you're safe. Keep this thread update - i'm interested. Maybe cut out the area, like the picture of the black case?

[iHero]

http://bestskinsever.com

[acosmichippo]

that doesn't really have anything to do with this thread...

[S-Man]

Okay, so I finally got my internet back up after that stupid Ike threw his pimp hand a little too hard and knocked out my cable...I also just today got my 4 iPhone Screen protectors. I got 2 anti-glare and 2 crystal. I should be able to go to the shop this after noon (it's after 2 a.m.) and cut some white covers and slap it on my phone and have pics up by tonight. Stay tuned! It's getting close!

P.S. I'm going to try out the anti-glare cover on mine. So I'll have 1 clear and 1 anti-glare available. iconone has first dibs since it was his prodding that got this started. Ctgry5 has second dibs.
What finish do you want iconone? Crystal or Anti-Glare?

[iconone]

I don't know the diff between the 2 but crystal will work. Also did you cut new ones with the 3 red circles cut out?What part of Houston are you in I might be able to meet you if you are not to far. If not could you mail it to me I'll mail you back some $$ Thanks

[S-Man]

The difference can be found in THIS THREAD (http://www.everythingicafe.com/forum/iphone-accessories/crystal-vs-anti-glare-cover-my-take-34454.html)
I'll P.M. You.

[Ctgry5]

Okay, so I finally got my internet back up after that stupid Ike threw his pimp hand a little too hard and knocked out my cable...I also just today got my 4 iPhone Screen protectors. I got 2 anti-glare and 2 crystal. I should be able to go to the shop this after noon (it's after 2 a.m.) and cut some white covers and slap it on my phone and have pics up by tonight. Stay tuned! It's getting close!

P.S. I'm going to try out the anti-glare cover on mine. So I'll have 1 clear and 1 anti-glare available. iconone has first dibs since it was his prodding that got this started. Ctgry5 has second dibs.
What finish do you want iconone? Crystal or Anti-Glare?

Can't wait to see the masterpiece...

[S-Man]

Booooooooo....I just found out today that one of the plotters rollers are broken. I may not be able to make them until early next week. I hope it will be worth the wait.
I feel like Steve Jobs delaying the release of a new product...

[Ctgry5]

Lmao.... But keep us updated..

[miggs1310]

Booooooooo....I just found out today that one of the plotters rollers are broken. I may not be able to make them until early next week. I hope it will be worth the wait.
I feel like Steve Jobs delaying the release of a new product...

just use a hole puncher, or make a cardboard template and use an exacto knife to make a hole for the sensors. Call it the "prototype", then we can get a basic idea of how it looks and you can make more proffesional ones later:laugh2:

[S-Man]

Tuh-DAH!
(crappy photo, I know my bro took it, i have better photos and a video I'll post later)

http://slickpix.smugmug.com/photos/375816224_KwD63-L.jpg

[Ctgry5]

Tuh-DAH!
(crappy photo, I know my bro took it, i have better photos and a video I'll post later)

http://slickpix.smugmug.com/photos/375816224_KwD63-L.jpg

Wouldn't it be better to do an oval coutout on the top... Just my opinion.. I'm not an expert.. maybe you had to cut out that way but it looks kind of awkward.. but maybe in a full pic it might look better... I apologize if I sound like a critic but our iphones have to look the best right....

Much respect....

[S-Man]

Tru-Dat,
I cut it like that for the sensors on either side of the earpiece, and that's the way my case mate cover is cut. I thought it looked the most reasonable. I can do one with a large oval, but it might look weird-er.
Looking at the face, There are two round sensors on the left side of the earpiece. I'm not sure if there's one on the right side, I couldn't see one, but I figure the case mate had to be cut like that for a reason, perhaps it was to keep the look symmetrical.

[S-Man]

Here is a rough example of what an oval would look like. The red circles are the approximate location of the sensors.
edit: I found a third sensor far left of the earpiece. It seems I have covered it after all, as when I go outside, the screen does not auto-brighten...What a conundrum...
http://slickpix.smugmug.com/photos/375843303_oEqcw-M-0.jpg

[Ctgry5]

what about a cut out like in the case mate case pic you had previously mentioned about... Just my thought...

[S-Man]

what about a cut out like in the case mate case pic you had previously mentioned about... Just my thought...

That might work. I'm home now so it'll have to wait until monday.
I need to get exact measurements on the sensors so that I can leave space accordingly. Why did they have to put the daylight sensor so far on the left!?
I thought it was magic at first! They should have left it magic!

Edit again: I took off the anti-glare screen cover. It made the graphics look like trash. White screens were all rainbow and other stuff lost sharpness. So what I did was just stick the vinyl directly onto the glass. I know, I know I didn't recommend this at first, but if I use high-performance vinyl it will not leave a residue. It looks kick-A applied directly to the glass. I'll post some pics tonight.

Edit: Pics with anti-glare screen
http://slickpix.smugmug.com/photos/375870926_LBVry-L.jpg

http://slickpix.smugmug.com/photos/375870021_xmHHM-L.jpg

[S-Man]

How do I embed a video?

Pics of vinyl directly on glass.
http://slickpix.smugmug.com/photos/376014584_3gont-L.jpg

http://slickpix.smugmug.com/photos/376014609_xh6dr-L.jpg

"> (http://www.everythingicafe.com/forum/%3Cobject%20width=)

[iconone]

I was looking for a case for the 3g on youtube and found this. www.decalgirl.com
Or on YouTube look up 3g case decal girl
S-man I like what it looks like so far but try one with just the 3 sensor holes cut out.

[S-Man]

I remember hearing about decalgirl before...They have everything! Just when you think you've thought up something new, someone has already one-upped you! hah. Yeah, I'll make one with like a squareish oval cut out for the sensors, much like the case mate case i posted.

[firewire]

S-man you created almost exactly what I was hoping for ever since that fake pic of colored 3G's was released on the net. If you were to create the screen protector with just the holes for the sensors and earpiece as opposed to the oval or current cutout I would definitely buy one. This is the pic I am talking about:http://www.iphon.fr/public/Skud/.24586611_m.jpg

[S-Man]

Heres what I have now. What say you?
http://slickpix.smugmug.com/photos/378099566_xsZoX-L.jpg

[iconone]

Wow!!! That's looks bad A!!!! S-man mad props will you pm me your address. Once again that looks f n sweet!!

[firewire]

S-Man all we need now is a white cover for the home button and it's perfect!

[S-Man]

I don't know man, it's concave shape will prevent vinyl from laying Down without wrinkles. I can try though. We'll see.

[S-Man]

You guys were right again...I put one on my phone and it worked. It's not that concave. I wonder if there should be something on it though, instead of just white...Oh, and the daylight sensor works perfectly.
http://slickpix.smugmug.com/photos/378211338_5Kqcj-L.jpg

[iconone]

How about a black square like on a stock iphone or a star even better a astros logo.

[thomasanderson]

You guys were right again...I put one on my phone and it worked. It's not that concave. I wonder if there should be something on it though, instead of just white...Oh, and the daylight sensor works perfectly.
http://slickpix.smugmug.com/photos/378211338_5Kqcj-L.jpg
Dude you should totally sell these. I was so disappointed when I went into the apple store on iday and realized that the entire phone wasnt white (just the back). That is the "only" reason I settled for the black. I would so go and buy a white one and give the black to the ole lady if you are willing to sell me one of these.

[S-Man]

Yeah, I don't mind making them for people.
I don't know about a star on the home button, or even a square. I could possibly cut a small square on the home button so that it would be a small black square, but I got to thinking, "Why?" We know what and where the home button is, so why do we need a label or a marking on it?
I'm trying to imbed a video or at least make a link but it always says "page not found" and will not embed the video. What gives?

[S-Man]

http://slickpix.smugmug.com/photos/378464657_fTHuw-L-1.jpg

http://slickpix.smugmug.com/photos/378464656_SUn7L-L-1.jpg
http://slickpix.smugmug.com/photos/378465576_2rsxz-L.jpg

http://slickpix.smugmug.com/photos/378464603_hFzpY-L.jpg

[get the green]

This is what I have so far. It would be much better to scan the clear screen cover and apply it to that. I haven't applied it to my phone because I don't want to apply it directly to the glass. I don't have any screen protectors either. Maybe I'll order a 3-pack or something. Looks promising so far...
http://slickpix.smugmug.com/photos/369299200_5F8bP-L.jpg

I would pay money for this! Make more



***edit***
Didn't read the whole thread before posting, how can I buy one?!

[Ctgry5]

Wow!!! That's looks bad A!!!! S-man mad props will you pm me your address. Once again that looks f n sweet!!


I'm ready too S-Man... :laugh2:

[S-Man]

P.M.'s sent, guys...

[firewire]

One more question S-Man: I can't tell from the pics if it covers the entire screen or not. In other words, this is a full front screen protector that happens to have a white trim, correct? It's not just a piece of vinyl for the outer edge right? If it covers the whole screen, then I want in.

[S-Man]

One more question S-Man: I can't tell from the pics if it covers the entire screen or not. In other words, this is a full front screen protector that happens to have a white trim, correct? It's not just a piece of vinyl for the outer edge right? If it covers the whole screen, then I want in.

I can do either one. What I have on my phone at the moment is just vinyl applied directly to the glass.
I feel the iPhone needs no screen protector, as the glass is very resilient and scratch-proof.
If a screen protector is desired, i can apply vinyl to one and send it to you. That way you install the screen protector with white trim.

[firewire]

I can do either one. What I have on my phone at the moment is just vinyl applied directly to the glass.
I feel the iPhone needs no screen protector, as the glass is very resilient and scratch-proof.
If a screen protector is desired, i can apply vinyl to one and send it to you. That way you install the screen protector with white trim.
Thanks S-Man. If you can do that, PM me the details.

[S-Man]

P.M.'d...
I just ordered a bunch of clear screen protectors. The Anti-Glare ones looked like trash.
They should be here next week.

[DoriBee]

S-Man all we need now is a white cover for the home button and it's perfect!

I've been reading this thread from the beginning Because I bought the white 3g too... I gotta say this is the most polite forum I've Ever seen lol

You guys put this man to work! lol It looks Awesome though! S-Man you did a great job... Since everyone's making requests, Can i get a pink one? lol :laugh2:

[S-Man]

I can pretty much make them whatever color, although I'd have to see what color vinyl I have in stock. I'd hate to have to order a whole roll of vinyl I'll never use to cut one iPhone sticker.
White is a pretty commonly used material, so its always in stock. So are the standards like red, blue, silver and so on.

[blazew0n]

Great Job, can you Pm me the details and Payment info. Def. love the white with screen protector and may do another color like the red or silver with screen protector.

[mosh_2k7]

Wow this is exactly what ive been looking for! Do you still have these for sale? cant find one anywhere! is it not possible to do the whole thing white without those holes for the sensors? do the sensors not work with the vinyl covering it? is it possible to make the vinyl material near the sensors less thicker using some sort of chemical so that light can pass through it so that the sensors can work? if not would it be possible for you to make me a screen protector as shown in the pic below! ive just amended your picture to make it easier :laugh2:

http://i426.photobucket.com/albums/pp346/mosh_2k7/new2.jpg

but ideally i prefer to have this one if its possible to do it without affecting the sensors!

http://i426.photobucket.com/albums/pp346/mosh_2k7/new3.jpg

Thanks

[iconone]

The light sensors must be cut out. Any time you made a call your phone would stay black and you couldn't see anything.

[mosh_2k7]

Oh i get what you mean now! That would definately be a problem! Im happy to go with the screen protector that i put in my first post with the one small hole and the larger vertical hole which combines the other two sensors! :) i want the screen protector version! Could someone please pm me the price? Thanks

[tHe KiNg]

This is what I have so far. It would be much better to scan the clear screen cover and apply it to that. I haven't applied it to my phone because I don't want to apply it directly to the glass. I don't have any screen protectors either. Maybe I'll order a 3-pack or something. Looks promising so far...
http://slickpix.smugmug.com/photos/369299200_5F8bP-L.jpg


Cool, where did you buy this from?

It looks like its homemade.

[iconone]

It is he made them.

[S-Man]

Hey guys, wow this is an old thread!
Yeah, I made them on the vinyl plotter at the shop.
I had mine on the glass for a long time, but it eventually wore out so I took it off.
And yeah the holes are necessary for the light sensors, as was mentioned. You could use the one already applied to the screen protector too.
Whichever you want. I personally liked it on the glass because it felt and looked better IMO. I don't like screen protectors. The only problem of having it on the glass is that you'd have to apply it yourself and it's probable that you'll mess it up the first time or two. You have to be very careful applying it. You can PM me if you want one.
This is the technique I use though: LINK (http://www.youtube.com/watch?v=i-VGSEcHHyo)
Thats me applying the palmguard to my MBP.

[mosh_2k7]

if you can do it with the holes as shown in the pictures below, then i'll definately buy one!

http://i426.photobucket.com/albums/pp346/mosh_2k7/finalwhiteyes.jpg

knowing me i'll definately mess it up if i apply it directly to the glass, so i want it applied directly to the screen protector! could you also apply the home button sticker to the screen protector film aswell? if i get it on the screen protector from you, do you apply the vinyl directly to the sticky underside of the screen protector or just on top of the surface of the screen protector?

[tHe KiNg]

if you can do it with the holes as shown in the pictures below, then i'll definately buy one!

http://i426.photobucket.com/albums/pp346/mosh_2k7/finalwhiteyes.jpg




Looks nice ~! :2cool:

[S-Man]

Right now the one I have made are the three dots cut out for the three sensors. I also have some 'crystal' screen protectors. You can PM me if you want.

[ktownerxx213]

S-man, so you have one with 3 holes and all white screen protector right??
Pm me with a price and etc! ;)

[S-Man]

It's like this:
http://slickpix.smugmug.com/photos/378099566_xsZoX-L.jpg

[ktownerxx213]

S-man, is it like a sticker or is it removable like the screen protectr??

[S-Man]

It's a vinyl sticker/decal like what is used on vehicle graphics and lettering.
That is applied to the clear static-cling screen-protector.
I personally like not having a screen protector and applying the vinyl to the glass, but it might be easier for you to apply just the screen protector with the vinyl already on it.

[garykirsten63]

As far as I know that is known as a screen protector. A transparent sheet made of thin plastic. It is really helpful for any sensitive screen of any device.

[iconone]

^^ Good job!