How to easily jailbreak 1.1.3 with the FULL jailbreak (Windows/Mac)

[Tinman]

A simple how-to (Windows):

Update (02/11/2007 6:01 PM MST): Mac stuff removed from guide.
Update (02/13/2007 9:51 AM MST): GUI version is out, much easier!
Update (02/13/2007 12:45 PM MST): ZiPhone 2.0 now out! Guide updated.
Update (02/14/2007 12:32 PM MST): ZiPhone 2.1 now out! Guide updated.
Update (02/15/2007 9:14 AM MST): ZiPhone 2.2 now out. Verbose option removed. Guide updated.
Update (02/16/2007 2:18 PM MST): ZiPhone 2.3 now out. Guide updated.
Update (02/18/2007 9:41 AM MST): ZiPhone 2.4 now out. GUI version not included. Guide not updated.



1.) Perform a full restore to 1.1.3 via iTunes. You want to be on freshly restored 1.1.3. Don't bother syncing to iTunes, you can do that later. You can accept to restore from your previous backup now, or wait till you are finished jailbreaking 1.1.3.

http://www.ctaz.com/%7Emlynch/x/jb1.png



2.) Download ZiPhone2.3.zip (http://rapidshare.com/files/92908198/ZiPhone2.3.zip.html)(download updated 2/18/2007 9:41 AM MST) and extract its contents into a folder on your computer. Under Windows I recommend creating the folder c:\ZiPhone and extracting the contents there.

3.) Open "My Computer" and navigate to c:\ZiPhone, or wherever you extracted the contents of ZiPhone.zip. Double-click into the ZiPhone folder and then double-click ziphoneGUI.exe.

http://www.ctaz.com/%7Emlynch/x/jb2.png



4.) At the main ZiPhone GUI screen check-off Jailbreak. Click start.

http://www.ctaz.com/%7Emlynch/x/jb3.png


5.) That's it! You will have Installer on your springboard. Enjoy. Close ZiPhone GUI. (The actual jailbreak process takes less than 3 minutes!)


Success! By FAR this was way easier than the previous jailbreak methods.

http://www.ctaz.com/%7Emlynch/x/jb8.png


--
Mike

[Tinman]

What doesn't work:

TuneWiki:
Enter these commands from a terminal session:
mkdir /private/var/root/Media/LRC
chmod -R 0777 /private/var/root/Media/LRC

NES, GBA, SNES, PSX Emulators cannot find Roms:
See fix here:
http://www.everythingicafe.com/forum/iphone-modifications/how-to-easily-jailbreak-1-1-3-with-the-full-jailbreak-windows-mac-22696-11.html#post190742

BeatPhone cannot find Samples:
See fix here:
http://www.everythingicafe.com/forum/iphone-modifications/how-to-easily-jailbreak-1-1-3-with-the-full-jailbreak-windows-mac-22696-11.html#post190742

iPhysics:
See fix here:
http://www.everythingicafe.com/forum/iphone-modifications/how-to-easily-jailbreak-1-1-3-with-the-full-jailbreak-windows-mac-22696-25.html#post191512



Issues:

Mail Application Doesn't Launch:
See fix here:
http://www.everythingicafe.com/forum/190742-post105.html

iBrickr, Funtastic, and iPhoneBrowser act like the iPhone is still not jailbroken and they can't be used to transfer files:
This is due to afc2 not being started. It can be fixed by editing a single plist. See here:
http://www.everythingicafe.com/forum/iphone-modifications/how-to-easily-jailbreak-1-1-3-with-the-full-jailbreak-windows-mac-22696-9.html#post190613 (http://www.everythingicafe.com/forum/190613-post83.html)

Or add this source in Installer:
http//i.unlock.no

Then install ZiPhone iBrickr Fix. Reboot iPhone for changes to take (turn completely off, then back on again).

[EJW2202]

Does the jailbreak still have the problems with syncing contacts and using the finder on google maps or has all of that been fixed. I haven't checked on these things in a while.

[Tinman]

Does the jailbreak still have the problems with syncing contacts and using the finder on google maps or has all of that been fixed. I haven't checked on these things in a while.
That's all been fixed with this new jailbreak.

Will test movie rentals next...



--
Mike

[EJW2202]

Ok, thank you very much!

[mittenman]

Mucho thankos Tinman!!

[EJW2202]

When you do the restore should you activate it or leave it at the slide for emergency screen?

[Tinman]

When you do the restore should you activate it or leave it at the slide for emergency screen?

I let it activate, but did not sync till I had everything working. Actually I did not even restore from the backup till I had it jailbroken.

Then I went to iTunes and told it to use my prior settings backup, which it did without issue.


Looks like movie rentals work too (they didn't work with any 1.1.3 jailbreak previously).



--
Mike

[EJW2202]

Worked like a charm. Thanks again.

[MiataLord]

ok i follow the instructions, ran the cmd jailbreak file, didnt need to enter anything, it just told me to turn off phone, disconnected usb cable, hold down home key while connect usb connector, and no apple sign pops up, what the hell!!!!

[monkeysrock0622]

wow this is very lucky for me, i had a jailbroken 1.1.3 from the previous method, last night, but had to restore because i accidentally did something wrong. i did not want to have to go through all the confusing instructions!

[patrickj]

Do most 3rd party apps still work? Does Mobile user still have God privileges? Who released this - dev team or ...?

[Tinman]

Do most 3rd party apps still work? Does Mobile user still have God privileges? Who released this - dev team or ...?
This was released by Zibri, hence Ziphone. This was the jailbreak the dev team had been holding up--it's the real deal.

Still testing apps but I can confirm that movie rentals work!


--
Mike

[x666x]

Cool a jailbreak with padded walls. Gonna give this a go after work.

This will be my final jailbreak, this flavor of the month **** is growing ridiculous.

Also has anyone tried this on a Mac yet?

[MiataLord]

ok i follow the instructions, ran the cmd jailbreak file, didnt need to enter anything, it just told me to turn off phone, disconnected usb cable, hold down home key while connect usb connector, and no apple sign pops up, what the hell!!!!
can anybody help me with this plz?

[monkeysrock0622]

hey, can anyone help me? i just got to the part to power off the iphone, but when i disconnect it and hold the home button while reconnecting it, it doesnt do anything.... can i get some help please?


EDIT: i am having the same problem as MiataLord above me ^^^

[Tinman]

ok i follow the instructions, ran the cmd jailbreak file, didnt need to enter anything, it just told me to turn off phone, disconnected usb cable, hold down home key while connect usb connector, and no apple sign pops up, what the hell!!!!
First, "off" means off, not sleep. After it's off you then hold down Home button while connecting the USB cable. The iTunes logo will appear shortly--let go of Home button when you see it.



--
Mike

[brzman1]

A simple how-to (Windows/Mac):
(Note: As of this writing the Mac version is reportedly flaky. There should be an update out shortly.)


1.) Do a full restore to 1.1.3 via iTunes.

2.) Download jailbreak113full.zip (http://rapidshare.com/files/90992326/jailbreak113full.zip.html) and extract its contents into a folder on your computer. Under Windows I recommend creating the folder c:\113jb and extracting the contents there.

3a.) Windows: Open "My Computer" and navigate to c:\113jb, or wherever you extracted the contents of jailbreak113full.zip. Double-click jailbreak.cmd.

3b.) Mac: Open a terminal window and navigate to the folder you extracted jailbreak113full.zip into. Type ziphone j to jailbreak. (Might need to chmod 777 the files first.)

4.) You will be prompted to put the iPhone into restore mode. The on-screen instructions may not be clear. Do not put it into DFU mode! Turn the iPhone off, disconnect it from the USB cable, then hold down Menu button while connecting it to the USB cable again. When the iTunes logo appears let go of the Menu button.

5.) That's it! You will have Installer on your springboard. Enjoy.


Success! By FAR this was way easier than the previous jailbreak methods.



--
Mike

This method kick butt!!! However, the summerboard is in the script. How do i access it to change my themes?

[Tinman]

This method kick butt!!! However, the summerboard is in the script. How do i access it to change my themes?
Not sure what you meant by "in the script."


hey, can anyone help me? i just got to the part to power off the iphone, but when i disconnect it and hold the home button while reconnecting it, it doesnt do anything.... can i get some help please?


EDIT: i am having the same problem as MiataLord above me ^^^
See my reply to MiataLord.


--
Mike

[jjsquizz]

A simple how-to (Windows/Mac):
(Note: As of this writing the Mac version is reportedly flaky. There should be an update out shortly.)


1.) Do a full restore to 1.1.3 via iTunes.

2.) Download jailbreak113full.zip (http://rapidshare.com/files/90992326/jailbreak113full.zip.html) and extract its contents into a folder on your computer. Under Windows I recommend creating the folder c:\113jb and extracting the contents there.

3a.) Windows: Open "My Computer" and navigate to c:\113jb, or wherever you extracted the contents of jailbreak113full.zip. Double-click jailbreak.cmd.

3b.) Mac: Open a terminal window and navigate to the folder you extracted jailbreak113full.zip into. Type ziphone j to jailbreak. (Might need to chmod 777 the files first.)

4.) You will be prompted to put the iPhone into restore mode. The on-screen instructions may not be clear. Do not put it into DFU mode! Turn the iPhone off, disconnect it from the USB cable, then hold down Menu button while connecting it to the USB cable again. When the iTunes logo appears let go of the Menu button.

5.) That's it! You will have Installer on your springboard. Enjoy.


Success! By FAR this was way easier than the previous jailbreak methods.



--
Mike


Mike, these may sound like stupid questions , but I HAVE to ask!! By menu button, u do mean the home button and if by some chance this doesn't work, can I rejailbreak 1.1.2?

[monkeysrock0622]

First, "off" means off, not sleep. After it's off you then hold down Menu while connecting the USB cable. The iTunes logo will appear shortly--let go of Menu when you see it.



--
Mike
thats exactly what i did, but the apple logo never shows up.

[Tinman]

Mike, these may sound like stupid questions , but I HAVE to ask!! By menu button, u do mean the home button and if by some chance this doesn't work, can I rejailbreak 1.1.2?
Yes, menu=home (will change the guide, thanks).

As for going back to 1.1.2, yes you can (but you might as well stay with 1.1.3 IMO).



--
Mike

[x666x]

thats exactly what i did, but the apple logo never shows up.

Judging by your signature, you're on a Mac, which answers my previous question, has anyone tried this on a Mac yet...

Looks like its flaky alright. :\

I'll be damned if I'm gonna go into the other room to do this on PC, it ain't right!

Well I'll post how this goes under XP through Leopard. /grumbles

[Tinman]

thats exactly what i did, but the apple logo never shows up.
Keep trying. Use the dock if you need to (some people find that easier than using the cable). It took me several tries, but in my case I was originally trying DFU mode.


--
Mike

[jjsquizz]

Yes, menu=home (will change the guide, thanks).

As for going back to 1.1.2, yes you can (but you might as well stay with 1.1.3 IMO).



--
Mike

Thanks. Got it. Gonna try right now.

[monkeysrock0622]

just to make sure, when you say shortly, do you mean a couple minutes or like less than 30 seconds?

[Tinman]

just to make sure, when you say shortly, do you mean a couple minutes or like less than 30 seconds?
Less than 5 seconds!

If you can't do that you can try putting it into DFU mode first. If the jailbreak finishes without an Installer icon try it again in regular restore mode.




--
Mike

[brzman1]

Not sure what you meant by "in the script."



See my reply to MiataLord.


--
Mike

I looked at the reply, but i wanted to know how to access the summerboard.

[monkeysrock0622]

I looked at the reply, but i wanted to know how to access the summerboard.
i feel really stupid, but how do you do that manually? i completely forgot.

[MiataLord]

ok tinman, i turned the phone off, disconnected the usb cord, held down home button, reconnected usb, apple sign came on, i released home key, phone booted up with no Installer icon, help!!!

[Tinman]

ok tinman, i turned the phone off, disconnected the usb cord, held down home button, reconnected usb, apple sign came on, i released home key, phone booted up with no Installer icon, help!!!
If it booted up with the Installer icon you are done. Start installing apps!

After going into restore mode it only takes another minute or two to finish the jailbreak--this one is very fast.

Edit: OK I see you wrote "no" Installer icon. If so you'll need to do it again. Make sure you see the iTunes logo with the cable.


--
Mike

[monkeysrock0622]

ok tinman, i turned the phone off, disconnected the usb cord, held down home button, reconnected usb, apple sign came on, i released home key, phone booted up with no Installer icon, help!!!
did you mean without the installer icon?

oh and i finally got the logo to show up, but the installer icon still isnt there.

[MiataLord]

did you mean without the installer icon?

oh and i finally got the logo to show up, but the installer icon still isnt there.
same here, sry tinman i meant no icon, and whats dfu mode?

[monkeysrock0622]

yay! i finally got it. thanks for the help tinman.

[MiataLord]

yay! i finally got it. thanks for the help tinman.
tell me step by step what u did?

[Lincoln]

same here, sry tinman i meant no icon, and whats dfu mode?

DFU mode is what iTunes calls Restore Mode; the phone cannot be used unless it is restored. It is necessary for a few jailbreaks. To enter it, hold the power + home buttons for 10 seconds, then let go of the home button and continue holding the power button.

- John

[hinzy]

DFU mode is what iTunes calls Restore Mode; the phone cannot be used unless it is restored. It is necessary for a few jailbreaks. To enter it, hold the power + home buttons for 10 seconds, then let go of the home button and continue holding the power button.

- John

Isn't it the other way around... you let go of the power button and hold the home key in???

[monkeysrock0622]

tell me step by step what u did?
yah i kinda just did the dfu thing, then the logo popped up and restarted, but without the installer icon, so then i tried the home button thing a couple more times, then i tried the dfu again and it worked

[dotcom]

so i have a question, i got it to jailbreak the phone under 113 and i have installer up and running. i loaded the book app and it runs fine however when i plug in ifuntastic it says i need to downgrade itunes for it to communicate with the phone, ok did that and it communicates with the phone however it is showing the phone as shackled still and i can not move files onto the phone or even see any of the normally hidden folders on the phone ie the usr or media folders. how can i unshackle the phone or do you know of another app that i can use to move files back and forth?

thanks

[Tinman]

so i have a question, i got it to jailbreak the phone under 113 and i have installer up and running. i loaded the book app and it runs fine however when i plug in ifuntastic it says i need to downgrade itunes for it to communicate with the phone, ok did that and it communicates with the phone however it is showing the phone as shackled still and i can not move files onto the phone or even see any of the normally hidden folders on the phone ie the usr or media folders. how can i unshackle the phone or do you know of another app that i can use to move files back and forth?

thanks
iBrickr .91 says the same thing (that the iPhone is still in jail). I look at this as a good thing, as it really is jailbroken. Must be that the soft jailbreaks still used parts from 1.1.2.

In any case install BSD subystem, then OpenSSH. Then you can xfer files via SCP.



--
Mike

[dotcom]

tried to install the bsd subsystem and the download fails after multiple tries. ive even restarted the phone to see if that is the problem, could it be the phone or the file server is being overloaded?

[Tinman]

tried to install the bsd subsystem and the download fails after multiple tries. ive even restarted the phone to see if that is the problem, could it be the phone or the file server is being overloaded?
Yes, Nullriver is overloaded. It took me three tries to get BSD. Don't worry, has nothing to do with the jailbreak itself.



--
Mike

[Tinman]

same here, sry tinman i meant no icon, and whats dfu mode?

While the USB cable is connected hold down Sleep and Home till the Apple logo appears--at which point let go of Sleep till the iTunes logo appears. Then let go of the Home button.


--
Mike

[jjsquizz]

Yes, menu=home (will change the guide, thanks).

As for going back to 1.1.2, yes you can (but you might as well stay with 1.1.3 IMO).



--
Mike
All done, Tinman. Thanx loads. Honestly i was deathly afraid of the other jailbreaks. But u you'd have to be more incompetent than me not to be able to do it this way.LOL

[hydro94530]

This worked perfectly, thanks Tinman. I have some somewhat off topic questions, but what should I install in order to change the home screen and make use my own or other icons. Is there a good FAQ soemwhere? Also, for the NES emulator, it keeps saying it can't find the host when I go to install, is it just overloaded or is something wrong maybe? Thanks again.

[Conan]

haha, jailbroken 1.1.3 phone, thanks tinman!!!

[biggeek]

Wow that's almost as easy as the first jailbreak!

That bit about the home button is going to snag a lot of people. This was my first exposure to that feature (I've always done the 2-button, 20-second, 10-second thing which apparently is wrong?)

[amiroo79]

What about an unlock? The Ziphone method apparently does it all in just one step. Why the need to have a special method only for a jailbreak? Unless that is all you want.

Just FYI, a friend just tried to do the ziphone method now on a wk1 phone and it apparently bricked it. He's taking it back now. I guess it must have came with 1.1.2 and had an older bootloader. I hope they give him another one!

Also, I have a 1.1.1 OTB version phone that is jailbroken and unlocked with Bootloader 3.9. What would you say is the best way to get it up to 1.1.3 and have it jailbroken and unlocked?

[juju2682]

What about an unlock? The Ziphone method apparently does it all in just one step. Why the need to have a special method only for a jailbreak? Unless that is all you want.

Just FYI, a friend just tried to do the ziphone method now on a wk1 phone and it apparently bricked it. He's taking it back now. I guess it must have came with 1.1.2 and had an older bootloader. I hope they give him another one!

Also, I have a 1.1.1 OTB version phone that is jailbroken and unlocked with Bootloader 3.9. What would you say is the best way to get it up to 1.1.3 and have it jailbroken and unlocked?

On an AT&T phone????

[JimD]

OK... I have a jailbroken 1.1.2 phone. What is meant by step 1 "do a full restore to 1.1.3 via iTunes"?

I want to make sure I don't screw this up. "Full restore" suggest something other than "update", but I'd like to know the exact method of doing this.

- Thanks in advance.

[amiroo79]

On an AT&T phone????

No. On a TMobile phone cuz that's who i have service with...

Why would it matter. I basically am interested in a streamlined method to take my existing phone to 1.1.3 without the nerve racking methods out so far that require a chain of things to go right for them to work... i hate sitting there and not having things work.
especially after i saw my buddy brick his phone (which ATT replaced by the way!).

[juju2682]

No. On a TMobile phone cuz that's who i have service with...

Why would it matter. I basically am interested in a streamlined method to take my existing phone to 1.1.3 without the nerve racking methods out so far that require a chain of things to go right for them to work... i hate sitting there and not having things work.
especially after i saw my buddy brick his phone (which ATT replaced by the way!).

I'm sorry, I was asking if your buddy's phone was an AT&T phone.
Because I got my phone on DAY ONE also. I haven't heard anyone
else saying that they completely bricked there phone without any
way of restoring it back to factory using this new method.

[amiroo79]

I'm sorry, I was asking if your buddy's phone was an AT&T phone.
Because I got my phone on DAY ONE also. I haven't heard anyone
else saying that they completely bricked there phone without any
way of restoring it back to factory using this new method.

Oh, my bad... Yeah, with ATT. But they said there is something wrong with the phone itself and gave him another one. We kinda saw that as when we put it in restore mode, it did not look right (blank white screen).

He's on his way back now with a new one so we'll see if they gave him a brand new one with 1.1.3 and the new bootloader so we can do it all in one step.

But, I'm still curious to know if the ZiPhone method works or not cuz that seems to be the easiest for a full jailbreak and unlock.

[justahsquirrel]

gonna try this when i get home...sounds good.

[hydro94530]

Hi all, so two problems. I have no phone service now after doing this, and when I restarted my phone, it's now stuck on the connect to iTunes screen. Please help!!!

[brzman1]

Hey Mr. Mike. Sorry to keep bothering with the summerboard question. But i can't access it. Why? It shows in the installer "uninstall" section, but there's no icon on the phone. :embarrassed: Also, I can't get "ants" to work. oh. One more qustion. What's the purpose of installing BSD?

[blacklabel775]

Anybody have any success with a mac? When i run the ziphone file in the terminal i can get it into 'recovery mode' but then i get this error:

Please power off the iPhone, then hold the home button
and connect to dock to enter recovery mode.
Working...
Bus error
steve-xxxxx-computer:jailbreak113full SteveO$

Tinman, how do i chmod the files and what do i need to chmod?

Thanks in advance.

Edit:
Got it working. Thanks Tinman

[hydro94530]

I'm assuming since my phone stopped working that this somehow affected my ability to also install any apps. I tried 10 different ones and it kept saying that it couldn't locate the host.

So after you jailbreak, you telliTunes to restore to a previous version and you should be done right? I did that, and that's where I lost my phone and had that restart problem. I'm back toa normal 1.1.3 phone now with no jailbreak since it forced me to restore.

[KPSK]

Looks easy so i might have to give it a try. I have not jailbroken my phone since 1.02 version jailbreak :wink:

[Tinman]

Hey Mr. Mike. Sorry to keep bothering with the summerboard question. But i can't access it. Why? It shows in the installer "uninstall" section, but there's no icon on the phone. :embarrassed: Also, I can't get "ants" to work. oh. One more qustion. What's the purpose of installing BSD?
Try uninstalling it from Installer. If you can't do that there's another way.



--
Mike

[Tinman]

Hi all, so two problems. I have no phone service now after doing this, and when I restarted my phone, it's now stuck on the connect to iTunes screen. Please help!!!
That's very unusual. I would just restore and start over. There should be no issue with phone service if you already had a working activated, locked, iPhone.



--
Mike

[brzman1]

Try uninstalling it from Installer. If you can't do that there's another way.



--
Mike

It say, "main script execution failed!" I also can't customize.

[hydro94530]

That's very unusual. I would just restore and start over. There should be no issue with phone service if you already had a working activated, locked, iPhone.



--
Mike

Thanks Tinman, I'm trying it again right now. I did have iTunes open when I did this, could that have caused some problems?

[Tinman]

It say, "main script execution failed!" I also can't customize.

OK, then via SSH, Mobile Finder, or Terminal rename (or delete) this file:
/var/mobile/Library/Installer/LocalPackages.plist

This will make Installer think you have nothing Installed. So you might want to uninstall your other apps first (or reinstall them after).



--
Mike

[RXDI]

Thanks Tinman, worked on 2nd try.

[brzman1]

OK, then via SSH, Mobile Finder, or Terminal rename (or delete) this file:
/var/mobile/Library/Installer/LocalPackages.plist

This will make Installer think you have nothing Installed. So you might want to uninstall your other apps first (or reinstall them after).



--
Mike
o.k i'll try

[hydro94530]

Thanks Tinman, second try worked with phone functioning. I am new to this so bare with me. I can't seem to download or install any packages. Are they any initial steps I need to as a first time jailbreaker to get this to work? Anything I need on my PC, or should I simply be able to start installing stuff?

[KPSK]

i get nada. I restored my phone to 1.1.3 then closed itunes and opened jailbreak.cmd and when it told me to power off phone so i did and took out of dock then i held the home button and placed back on dock and when apple logo appeared i let go home button and phone starts back up but no installer icon and jailbreak.cmd does nada. Tried like 10 times

[Tinman]

i get nada. I restored my phone to 1.1.3 then closed itunes and opened jailbreak.cmd and when it told me to power off phone so i did and took out of dock then i held the home button and placed back on dock and when apple logo appeared i let go home button and phone starts back up but no installer icon and jailbreak.cmd does nada. Tried like 10 times

I had that happen when I wasn't in the right restore mode. Keep trying.



--
Mike

[KPSK]

ahh it worked. i just held down the home button a little longer till it showed it connecting with the usb and itunes logo

[brzman1]

OK, then via SSH, Mobile Finder, or Terminal rename (or delete) this file:
/var/mobile/Library/Installer/LocalPackages.plist

This will make Installer think you have nothing Installed. So you might want to uninstall your other apps first (or reinstall them after).



--
Mike
I tried to delete summerboard & the apps with no go. I don't understand why there isn't a icon for the summerboard if it show it installed.

[KPSK]

it's been awhile so what are the main things that i want to install?

[Jhors2]

You have to SSH the iPhone and go into the Plist for the list of programs installed and delete the presence of summerboard, restart, and then you can reinstall it, lemme find the guide. This worked for me :) http://www.hackint0sh.org/forum/showthread.php?t=25163&highlight=main+script

good luck :)

[mittenman]

Jailbreak was cake, just noticed now I've got 193mb of "other". Normal??

[jjsquizz]

You have to SSH the iPhone and go into the Plist for the list of programs installed and delete the presence of summerboard, restart, and then you can reinstall it, lemme find the guide. This worked for me :) http://www.hackint0sh.org/forum/showthread.php?t=25163&highlight=main+script

good luck :)

I'm afraid I'll need more than luck. That's a little over my head.
Thanx anyway.

[MiataLord]

finally 1.1.3 jailbroken, installed bsd subsys no problem and a **** load of apps with no issues, one thing that i noticed is ibrickr doesnt work anymore, i used this program to transfer nes games, icons, making themes, whats the deal? what are my options here?

[enigmanic]

finally 1.1.3 jailbroken, installed bsd subsys no problem and a **** load of apps with no issues, one thing that i noticed is ibrickr doesnt work anymore, i used this program to transfer nes games, icons, making themes, whats the deal? what are my options here?

Use WinSCP instead (you'll need SSH installed). Just google or search this forum on how to setup and use WinSCP with your iphone.

[nikeplayer222]

Ok i did the jailbreak no problem. Thanks again for that link. However when i install themes, they don't show up in summerboard or customize, but it shows them in the uninstall screen. can someone help me out?

[x666x]

JB'd and Activated in under 3 minutes. I did this on a Mac but with the PC jailbreak. I didn't feel like waiting :)

There's not much to see (youtube resizing it didnt help either), but the video below was my jailbreak. Worked like a charm, just had a quick hiccup when the Mac iTunes launched when the iPhone rebooted itself during the jailbreak process. I just clicked OK when prompted that my iPhone was detected in recovery followed by just closing iTunes and bringing XP back into focus. When you see the Windows camera wizard prompt come up my iPhone just rebooted into 1.1.3 with Installer on the springboard :)

I still had to setup symlinks for some of my emulators, but thats been about it. Synching worked right out of the gate.

http://www.youtube.com/watch?v=9Kpo55mdzXY

[Tinman]

Here are a couple apps that dont work for me now that used to with the Dev teams 1.1.3 jailbreak:

screenshot
iCountdown
They work fine for me.



--
Mike

[jaydoc1]

Time to do it!

I've only been waiting for a "Tinman Jailbreak" for 1.1.3. :laugh2:

Thanks again, Mike!

[Tinman]

I found a way to get iBrickr/Funtastic to work again.


Fast way:
Use SSH (SCP) to rename Services.plist, located here:
/System/Library/Lockdown/Services.plist

Download the attached file (Services.plist.txt). Rename it to Services.plist. Copy it to the iPhone into /System/Library/Lockdown/.


Advanced way:

Edit this file (use SSH/SCP to get it):
/System/Library/Lockdown/Services.plist

Add the following section (in red square, and in bold) right below the not bold text (which you will have):

http://www.ctaz.com/%7Emlynch/x/services.png


In either case then restart the iPhone. iBrickr/Funtastic will work!



--
Mike

[iMerlin]

Someone else asked this quesiton and I didnt see the answer.
I have a jailbroken 1.1.2 phone. Tinmans method mentions retoring to 1.1.3. Im assuming I need to first update the phone to 1.1.3 and then run the jailbreak, correct?
Also, would I be better off deleting all my apps before updating?

[Tinman]

Someone else asked this quesiton and I didnt see the answer.
I have a jailbroken 1.1.2 phone. Tinmans method mentions retoring to 1.1.3. Im assuming I need to first update the phone to 1.1.3 and then run the jailbreak, correct?
You should do a full restore (not update) to 1.1.3. A full restore wipes everything so you'll have a clean 1.1.3 with which to jailbreak.


Also, would I be better off deleting all my apps before updating?Not necessary because the full restore will wipe them anyway (whereas an update would leave a lot of stuff behind--but not usable).



--
Mike

[iamse7en]

I still had to setup symlinks for some of my emulators, but thats been about it. Synching worked right out of the gate.


What do you mean? Will I need to do something to get NES to work... Please describe step by step, thanks a million.

[connie]

Thank you so much Tinman, took me less than 5 minutes. Everything so far working fine. I am so happy now, I upgraded and was really missing my apps!
Thank you:laugh2:

[Tinman]

I tried to delete summerboard & the apps with no go. I don't understand why there isn't a icon for the summerboard if it show it installed.
I explained what you have to do in my last post: you have to rename that plist. The reason Summerboard is listed as installed is because it happened to be in the plist when the the jailbreak was first compiled. It's not installed, Installer merely thinks it is.


The jailbreak has been updated so that summerboard is no longer in the list of installed apps. If you really can't rename that plist just re-do the jailbreak, making sure to re-download the file listed in step 2.



--
Mike

[ironmarshal]

Hi Tinam, thanks for the guide. Can you tell me a few things. Does this jailbreak makes Maps work the right way on 1.1.3, not using any apps to help it? Do you or anyone know if MobileStack and Dock work on jailbreak 1.1.3? Can i change all the stock icons to my very own, even the signal/carrier/wifi/rest of that top roll? Thanks for any answers in advance.

T

[rennyn]

Dude, nice write up. I saw this jailbreak and was thinking of trying it but was still wary... but now I think I'm gonna go for it :D

[connie]

Ok, update, everything works for me except customize:frown:, even the google maps locator works for me.

[Tinman]

Hi Tinam, thanks for the guide. Can you tell me a few things. Does this jailbreak makes Maps work the right way on 1.1.3, not using any apps to help it? Do you or anyone know if MobileStack work on jailbreak 1.1.3? Can i change all the stock icons to my very own, even the signal/carrier/wifi/rest of that top roll? Thanks for any answers in advance.

T
Maps work 100% with this jailbreak; no issues at all.

Not sure about MobileStack as I don't use it. Haven't tried to change any icons yet either. I imagine a stabl... err, make that "usable" 1.1.3 friendly version of customize will be out soon.



--
Mike

[MiataLord]

ok, I have no sound, anybody have this problem?

[Sardy]

Hi. I am probably being thick here but please bear with me! I have a 1.0.2 which is not on AT&T or any other "Apple designated" carrier. Therefore, I understand that I will not be able to activate the phone if I upgrade to 1.1.3 using the method in this post. I had bought the phone unlocked and workable with any carrier's SIM card. Therefore, if I use the method in this post, can I then "unlock" the phone so that I can use any SIM card on it? Your advice / directions in this regard will be greatly appreciated. Thanks.

[boxta]

how do i restore to 1.1.3 and make sure all my contacts, etc are intact?

do i need to back it up ( i notice when you restore, the iphone
will restore from back up data, does it back it up at the beginning of the restore process? or do i have to manually back it up?)

and do i just upgrade to 1.1.3 first, then restore? or download 1.1.3, and click restore / update ?

thanks.. sorry i haven't kept updated on the latest iphone mod .. please help

[brzman1]

What works:
iTunes movie rentals (didn't work before under either jailbreak method)
BSD subsystem 2.0
OpenSSH
Installer (duh!)
iNewsGroup 1.0.5
Scetches
iBlackjack
iSolitaire
FiveDice
iPhysics
Snake
Mobile Finder
Mobile Preview
Mobile TextEdit
Still checking... but pretty much everything that worked before still works.


What doesn't:
TuneWiki (didn't work before either--needs an update for mobile user)



Issues:

Restore mode:
Some people have trouble getting into restore mode. If so keep trying and make sure you turn the iPhone completely off first. Then, while holding down the Home button, connect the iPhone's USB cable. When the iTunes logo appears let go of the Home button.

If you still have trouble getting restore to work try DFU mode. Get into DFU (while connected via USB) by holding down Home and Sleep till the Apple logo appears. Then release Sleep and hold Home till the iTunes logo appears.



iBrickr/Funtastic act like the iPhone is still jailbroken and they can't be used to transfer files:

This is due to afc2 not being started. It can be fixed by editing a single plist. See here:
http://www.everythingicafe.com/forum/190613-post83.html

Good morning. The problem is when i install the openSSH, i don't have an icon for it and i don't know how to change the summerboard through mobile finder.

[brzman1]

You have to SSH the iPhone and go into the Plist for the list of programs installed and delete the presence of summerboard, restart, and then you can reinstall it, lemme find the guide. This worked for me :) http://www.hackint0sh.org/forum/showthread.php?t=25163&highlight=main+script

good luck :)

How do i SSH the phone. I installed the "OpenSSH" but there' no icon.

[hinzy]

How do i SSH the phone. I installed the "OpenSSH" but there' no icon.

There is no icon when installing openssh... if you need to see an icon you can install 'services' or 'bosspref' from installer. i believe they each have an icon that controls on/off for ssh

you use winscp on your pc if you want to ssh to your phone

[mittenman]

I asked this once last night and did not get any help:frown:. Anywho, after my jailbreak, I'm showing almost 200mb of other with nothing installed?? Just wondering if this is normal, I've read on the previous soft upgrades there were some files that could be deleted. Any help??

[mittenman]

iBrickr/Funtastic act like the iPhone is still jailbroken and they can't be used to transfer files:

This is due to afc2 not being started. It can be fixed by editing a single plist. See here:
http://www.everythingicafe.com/forum/190613-post83.html

Hey Mike, shouldn't this read: "act like the iPhone is NOT jailbroken" ?

[miketl]

will i be able to follow this method if i have unlocked my iphone to another carrier?

thanks

[Tinman]

Hey Mike, shouldn't this read: "act like the iPhone is NOT jailbroken" ?

Good catch. Thanks. I'll edit it.


--
Mike

[mittenman]

Good catch. Thanks. I'll edit it.


--
Mike

No problemo, any thoughts on my previous post??

[brzman1]

There is no icon when installing openssh... if you need to see an icon you can install 'services' or 'bosspref' from installer. i believe they each have an icon that controls on/off for ssh

you use winscp on your pc if you want to ssh to your phone

I install the app, but still don't get the SSH method. Just for info.,I jailbroke my phone with the new method. Although I haven't tried the update version of the 1.1.3

[up10ad]

Tinman, it worked great, thanks. :2cool:

My only issue is that my MAIL application won't work. It opens and then closes. I have tried deleting my two mail accounts in Settings and they seem to delete, but when I go back in Settings afterwards they are there again. :angry:

I suspect it has something to do with my previous 1.1.3 Nate JB where I had to install the 1.1.3 mailfix from sleepers.net to get passwords to save.

Any suggestions?

[x666x]

Alright, I've had more time to fiddle around with this and I've hit a few snags along the way. I've posted what I've done to fix these small issues for those who may run into similar problems.

Mail Application Doesn't Launch
Problem: Launching the Mail application shows you a white screen and then closes.

Solution: Change the owner of /var/mobile/Library/Mail from "root" to "mobile"

Enter in Terminal: chown -R mobile /var/mobile/Library/Mail

NES, GBA, SNES, PSX Emulators cannot find Roms
Problem: Emulator cannot find Roms when launched.

Solution: Move roms to /var/mobile/Media/ROMs and change the owner of /var/mobile/Media/ROMs to "mobile." Lastly, add a ROMs symlink to /var/root/Media

Enter in Terminal: mv /var/root/Media/ROMs /var/mobile/Media/ROMs
Enter in Terminal: chown -R mobile /var/mobile/Media/ROMs
Enter in Terminal: ln -s /var/mobile/Media/ROMs /var/root/Media/ROMs

BeatPhone cannot find Samples
Problem: BeatPhone states it cannot find any samples when launched

Solution: Move /var/root/Media/BeatPhone to /var/mobile/Media/BeatPhone and change the folder owner to "mobile."

Enter in Terminal: mv /var/root/Media/BeatPhone /var/mobile/Media/BeatPhone
Enter in Terminal: chown -R mobile /var/mobile/Media/BeatPhone
Enter in Terminal: ln -s /var/mobile/Media/BeatPhone /var/root/Media/BeatPhone

[brzman1]

Alright, I've had more time to fiddle around with this and I've hit a few snags along the way. I've posted what I've done to fix these small issues for those who may run into similar problems.

Mail Application Doesn't Launch
Problem: Launching the Mail application shows you a white screen and then closes.

Solution: Change the owner of /var/mobile/Library/Mail from "root" to "mobile"

Enter in Terminal: chown -R mobile /var/mobile/Library/Mail

NES, GBA, SNES, PSX Emulators cannot find Roms
Problem: Emulator cannot find Roms when launched.

Solution: Move roms to /var/mobile/Media/ROMs and change the owner of /var/mobile/Media/ROMs to "mobile." Lastly, add a ROMs symlink to /var/root/Media

Enter in Terminal: mv /var/root/Media/ROMs /var/mobile/Media/ROMs
Enter in Terminal: chown -R mobile /var/mobile/Media/ROMs
Enter in Terminal: ln -s /var/mobile/Media/ROMs /var/root/Media/ROMs

BeatPhone cannot find Samples
Problem: BeatPhone states it cannot find any samples when launched

Solution: Move /var/root/Media/BeatPhone to /var/mobile/Media/BeatPhone and change the folder owner to "mobile."

Enter in Terminal: mv /var/root/Media/BeatPhone /var/mobile/Media/BeatPhone
Enter in Terminal: chown -R mobile /var/mobile/Media/BeatPhone
Enter in Terminal: ln -s /var/mobile/Media/BeatPhone /var/root/Media/BeatPhone

When i access terminal, it asked for a login and password. What is that?

[up10ad]

Mail Application Doesn't Launch
Problem: Launching the Mail application shows you a white screen and then closes.

Solution: Change the owner of /var/mobile/Library/Mail from "root" to "mobile"

Thanks x666x, I used WinSCP to change owners and it now works great. :D

[x666x]

Thanks x666x, I used WinSCP to change owners and it now works great. :D

No probs, but you thanked the wrong person lol! No biggie.

Anyway that timing was pretty cool, when I was done writing I noticed your post was just added to the thread before mine. Makes for smooth readin, heh.

[x666x]

When i access terminal, it asked for a login and password. What is that?

enter this to login:

ssh root@youriphoneIPaddresshere

You'll be asked for a password and the letters will be invisible so be absolutely sure you type this in correctly: alpine

Hit enter and you'll be logged in!

[Tinman]

I asked this once last night and did not get any help:frown:. Anywho, after my jailbreak, I'm showing almost 200mb of other with nothing installed?? Just wondering if this is normal, I've read on the previous soft upgrades there were some files that could be deleted. Any help??
That is normal. I also don't think iTunes is accurate as before I synced any iTunes media to my iPhone I checked free space via SSH. The media partition had only 4 MB (and that was due to the camera roll) even though iTunes claimed there was 195 MB of Other.

"Other" BTW is supposed to be anything on the media partition that iTunes can't recognize. FWIW I've had issues with Other even before ever jailbreaking--under 1.0.0.



--
Mike

[mittenman]

That is normal. I also don't think iTunes is accurate as before I synced any iTunes media to my iPhone I checked free space via SSH. The media partition had only 4 MB (and that was due to the camera roll) even though iTunes claimed there was 195 MB of Other.

"Other" BTW is supposed to be anything on the media partition that iTunes can't recognize. FWIW I've had issues with Other even before ever jailbreaking--under 1.0.0.



--
Mike

Cool, thanx. I don't remember it being that much before 113. Went from jb112 to 113 to jb113. If it's normal, that's fine, it's just that I've got a 4gig and every byte counts!!

[Tinman]

Thanks x666x, I used WinSCP to change owners and it now works great. :D
Be sure you can access your photos.

The only time Mail didn't work right for me is when I didn't get the jailbreak to work the first time through (no Installer icon), and then tried it again without doing a restore first.

Anyway I could be wrong but when that happened I think Photos didn't work either.

My point, and I might update the guide to reflect this, is that the jailbreak seemed much cleaner if it worked the first time through (after a fresh restore). So if this does apply to you, you might consider doing it again in one shot.



--
Mike

[x666x]

My update went smoothly via my XP/Mac install on the first go. Installer was exactly where it was before the rejailbreak, the same page and icon position. Photos worked, and everything synched, but for some odd reason /var/mobile/Library/Mail's owner was set to "0" instead of "501".

[Tinman]

Cool, thanx. I don't remember it being that much before 113. Went from jb112 to 113 to jb113. If it's normal, that's fine, it's just that I've got a 4gig and every byte counts!!
Type this at an SSH/terminal prompt:
df -h

That'll give you the real space on each partition.

Here's what mine looks like now (have already moved Applications to the Media partition via BossTool):
http://www.ctaz.com/%7Emlynch/x/df.png

Meanwhile iTunes says I only have 877 MB free. Might try to fill the whole thing up to see if I really can't use all of the space.



--
Mike

[Tinman]

My update went smoothly via my XP/Mac install on the first go. Installer was exactly where it was before the rejailbreak, the same page and icon position. Photos worked, and everything synched, but for some odd reason /var/mobile/Library/Mail's owner was set to "0" instead of "501".
It shouldn't need to be owned by mobile, and in fact none of my OEM apps are owned by mobile. The mobile user only needs permissions to execute it (0755), or write to it (0777) if it's a setting or whatnot.

I don't think, if the jailbreak went correctly, that you should have to do anything to Mail. This jailbreak doesn't set any permissions on its own--it merely replaces/alters fstab to free the iPhone from jail (and be able to execute on the media partition). My concern would be "what else didn't go right?"

The symlink for NES, etc., is to be expected as it's a problem on the app-side.

Actually, I'm impressed it's only down to a handful of apps that have issues now. I happen to use iNewsgroup a lot and really missed it when moving to 1.1.3. The author released a version he thought would work with 1.1.3 but it didn't (1.0.4--he hadn't moved up to 1.1.3 for a proper test). So I wrote him and within an hour I was testing 1.0.5--and it worked.



--
Mike

[jaydoc1]

Got up this morning, synced then restored my 1.1.1 iPhone. Updated to 1.1.3 and then jailbroke it. Unbelievable how easy this was and everything works. Haven't found one glitch. The jailbreak itself took less than a minute.

Thanks again, Mike!

[cubbie5150]

Waiting patiently for a Mac port... I only use Mac @ home, and I cannot do any of this on my Windows PC at work (our machines are severely locked-down; can't even install iTunes)...

[hinzy]

It shouldn't need to be owned by mobile, and in fact none of my OEM apps are owned by mobile. The mobile user only needs permissions to execute it (0755), or write to it (0777) if it's a setting or whatnot.

I don't think, if the jailbreak went correctly, that you should have to do anything to Mail. This jailbreak doesn't set any permissions on its own--it merely replaces/alters fstab to free the iPhone from jail (and be able to execute on the media partition). My concern would be "what else didn't go right?"

The symlink for NES, etc., is to be expected as it's a problem on the app-side.

Actually, I'm impressed it's only down to a handful of apps that have issues now. I happen to use iNewsgroup a lot and really missed it when moving to 1.1.3. The author released a version he thought would work with 1.1.3 but it didn't (1.0.4--he hadn't moved up to 1.1.3 for a proper test). So I wrote him and within an hour I was testing 1.0.5--and it worked.



--
Mike

Have you got:
SMSD
SMSNotify
CallD
Taskbar Notifier
Any Version of Customize

To work yet?

[iMerlin]

You should do a full restore (not update) to 1.1.3. A full restore wipes everything so you'll have a clean 1.1.3 with which to jailbreak.


Not necessary because the full restore will wipe them anyway (whereas an update would leave a lot of stuff behind--but not usable).



--
Mike

I should know this but I dont. Do I have to do anything to restore it to 1.1.3? In other words, when I plug the phone in now it tells me a new version is available. Do I cancel that and then click restore? Wont that restore me to 1.1.2?? Do I need to download 1.1.3 first, then do some kind of shift-restore thing??
Sorry for the stupid questions.
And thanks Tinman, I was waiting for you to post a guide like this for 1.1.3. You're posts are always dead on and very helpful. I used your method for 1.1.2 without any issues.

[brzman1]

enter this to login:

ssh root@youriphoneIPaddresshere

You'll be asked for a password and the letters will be invisible so be absolutely sure you type this in correctly: alpine

Hit enter and you'll be logged in!
how do i see my ip address?

[hinzy]

how do i see my ip address?

settings>wifi=next to the network you are connected to there is a blue arrow.. touch it and your ip address is right there

[Tinman]

I should know this but I dont. Do I have to do anything to restore it to 1.1.3? In other words, when I plug the phone in now it tells me a new version is available. Do I cancel that and then click restore? Wont that restore me to 1.1.2?? Do I need to download 1.1.3 first, then do some kind of shift-restore thing??
Sorry for the stupid questions.
And thanks Tinman, I was waiting for you to post a guide like this for 1.1.3. You're posts are always dead on and very helpful. I used your method for 1.1.2 without any issues.

OK, if you agree to update the iPhone will update to 1.1.3. The issue is that you will have remnants left behind.

You can update to 1.1.3 (doesn't take long) and then immediately restore so that you get a clean 1.1.3.

Not sure what happens if you haven't downloaded 1.1.3 yet and go right to restore. But for sure you can use shift-restore to restore to 1.1.3 directly, without going through an update.


--
Mike

[brzman1]

settings>wifi=next to the netwark you are connected to there is a blue arrow.. touch it and your ip address is right there

Thank you sir. Unfortunately, im not on wi-fi right now. I guess i'll wait untill i get home and just install the new 1.1.3 updated yesterday.

[mobilehavoc]

What's the downside of just running the jailbreak with a 1.1.3 iPhone? I restored it to 1.1.3 a few weeks ago and don't feel like restoring it and having to copy 8GB of crap all over again. Any issues with this?

[Tinman]

What's the downside of just running the jailbreak with a 1.1.3 iPhone? I restored it to 1.1.3 a few weeks ago and don't feel like restoring it and having to copy 8GB of crap all over again. Any issues with this?
Nope, as long as it's not already jailbroken you are good to go.



--
Mike

[Listerman]

Has anyone installed this using Mac Leopard 10.5.2 with iTunes 7.6?

[kansashawks]

ok does this work for the ipod touch to for the other features that are not related to the phone? For example do the games and other applications work with the jailbreak on ipod touch?

[mobilehavoc]

Nope, as long as it's not already jailbroken you are good to go.



--
Mike

Ok cool. I might try this if I get bored...I had a jailbroken iPhone since 1.0.2 or whatever but I quickly realized I hardly ever used any of the apps at all. I'm half tempted to just wait until hopefully the SDK is released and we get official apps that have companies behind them to do proper testing/optimization, etc. IMHO most of the current apps are (with some exceptions) are half-assed attempts or just never fully realized...

Only app I used a lot was scummVM and I can live without it....

[iamse7en]

What works:

iRadio? Anyone see if it works fine in 1.1.3. Important app for me. :) Thanks

[up10ad]

I've now got most of my apps back on and most work fine including Customize. It actually found some of my previous settings for sliders, etc.

The following work:

BossPrefs, Customize, Poof, SMB, SSH, HP-12C, VNotes, Sketches, Books, Converter, Pushr, iCountdown, weDict, SysInfo, Squid, iCrossword, iBlackjack, iSolitare, Garf, Frotz, Soduku, Backgammon, Mines & Marble.

The apps that don't work for me yet are iRadio and iFlix. iRadio just opens to a blank screen and closes, and iFlix opes to a blank screen, sits about 30 seconds and closes.

Is this also a owner issue or a rights issue?

[iamse7en]

Has anyone installed this using Mac Leopard 10.5.2 with iTunes 7.6?

The OSX version is back, they say, and I read some comments on Zibri's blog (http://zibree.blogspot.com/2008/02/ziphone-updated.html), and people were having problems. (bus error)

They say you may have to use MobileDevice.framework for it to work on OSX.

I'm not sure what all this means, but perhaps a Mac guru can go through it all to let us know what we must do to get it to work.

[iamse7en]

The apps that don't work for me yet are iRadio and iFlix. iRadio just opens to a blank screen and closes, and iFlix opes to a blank screen, sits about 30 seconds and closes.

Is this also a owner issue or a rights issue?

Thanks. Anyone else confirm that iRadio doesn't work? I might have to wait. They haven't updated it in awhile.

[x666x]

The OSX version is back, they say, and I read some comments on Zibri's blog (http://zibree.blogspot.com/2008/02/ziphone-updated.html), and people were having problems. (bus error)

They say you may have to use MobileDevice.framework for it to work on OSX.

I'm not sure what all this means, but perhaps a Mac guru can go through it all to let us know what we must do to get it to work.

I'd like to hear from a Guru as well. I'm still green when it comes to Macs, and would like to know whats up with this Mac version of the JB. From everything I've read it seems pretty flaky. I didn't find one post of a Mac user getting it to work outside VMware/Parallels when I checked lastnight, unfortunately.

To other Mac users out there, the current Jailbreak for PC works flawlessly under VMware.

[tymphillips]

Since the Mac version isn't up to par as the Windows version is...can I user my Windows machine to Jailbreak and then switch over to my Mac to activate and sync?

iPhone - At&T, 1.1.3(updated from 1.1.2OTB)

[iamse7en]

Since the Mac version isn't up to par as the Windows version is...can I user my Windows machine to Jailbreak and then switch over to my Mac to activate and sync?

Do you have 1.1.3 on it already? If not, you will need to restore it to 1.1.3, cleanly. Either way, you can restore to 1.1.3 on your Mac or PC, then just use your Windoze machine to jailbreak. You can then resync everything back on your Mac. Am I right?

Me? I'll wait until they get it to work on the Mac.

[Tinman]

Since the Mac version isn't up to par as the Windows version is...can I user my Windows machine to Jailbreak and then switch over to my Mac to activate and sync?

iPhone - At&T, 1.1.3(updated from 1.1.2OTB)
Restore to 1.1.3 on the Mac, let it activate and restore settings. Then do the jailbreak on the Windows box (it will stay activated).



--
Mike

[Listerman]

I believe my iPhone is a 1.1.1 OTB but I do not remember. Is this a guaranteed work for any iPhone that was updated to 1.1.3?

[paulomb]

Tinman:

I have an OOTB 1.0.2 Jailbroken and unlocked, not sure what method was used to unlock (most likely anysim 1.0.2 which i believe messes up with the baseband), does it matters at this stage still?

Can I just Restore the whole thing to 1.1.3 and then run Ziphone method to jailbrake and unlock? (does it erases all and replaces the old baseband and bootloader withe the new 1.1.3 included baseband and bootloader?)

Or will I get abrick while trying to restore to 1.1.3? will I have to virginize on 1.0.2 first? How can I do it?

thanks very much!

[brzman1]

settings>wifi=next to the netwark you are connected to there is a blue arrow.. touch it and your ip address is right there


is there another way to find my ip address?

[hinzy]

Have you got:
SMSD
SMSNotify
CallD
Taskbar Notifier
Any Version of Customize

To work yet?

SendSong doesn't work for me either. It will play/stop the song but none of the other options work.

Anybody have any luck with any of these?

[iMerlin]

It looks like it worked. I had to do the DFU though, not just the home button. But I now have Installer on my 1.1.3 iPhone. I love you all! THanks again TinMike!!

[hydro94530]

Well guys I give up. The jailbreak works fine, installer runs and I can browse all the packages. But whenever I try to download and install anything I get a "download failed" message every time. I have a very strong Wi-Fi connection so it can't be that.

I am new to the whole jailbreak process, but I understand part of this is installing Open SSH on the phone via Installer and then WinSCP on the PC in order to access and drop/move files. Do I have to have WinSCP running and be connected to my phone first in order to downlaod anything off installer?

[up10ad]

is there another way to find my ip address?
I'm not sure why you would want another way. You have to be connected to WiFi to use SSH, and getting your IP from your iPhone WiFi settings is certainly the easiest. I guess you could log into your WiFi Access Point and check the DHCP assignments and get it that way, but checking on the iPhone is much easier.

[up10ad]

... Do I have to have WinSCP running and be connected to my phone first in order to downlaod anything off installer?
No, you really don't need SSH and WinSCP right away after JB. It simply allows an easy way to connect to and manipulate the file system on your iPhone.

The first thing you should try after JB is run Installer and install the BSD Subsystem and Open SSH (for the future). Do you get an error no matter what applications you try to install?

[hydro94530]

No, you really don't need SSH and WinSCP right away after JB. It simply allows an easy way to connect to and manipulate the file system on your iPhone.

The first thing you should try after JB is run Installer and install the BSD Subsystem and Open SSH (for the future). Do you get an error no matter what applications you try to install?

Yeah that was the problem, I tried BSD first and then SSH, and I got the error just as quickly as when I tried other programs like NES and whatnot. I am at work doing this, and I have a Wi-Fi connection at home that only I use. Should I maybe re-jailbreak, and them wait until I get home? I live alone and have a secure connection so I am literally the only person that uses that one. Would that be worth trying?

[minoba82]

Thanks for the guide Tinman. This was incredibly easy. Although, it didn't work the first few tries as nothing would happen when I reconnected after holding the home button. Once I tried using the dock instead of just the cable, it worked perfectly.

[rennyn]

BTW, you guide is fantastic.

But you really should credit the original source of this information: http://zibree.blogspot.com/2008/02/ziphone.html

Edit: I do see that you added your own helpful stuff to the file.

[Tinman]

BTW, you guide is fantastic.

But you really should credit the original source of this information: http://zibree.blogspot.com/2008/02/ziphone.html

And rather than host the file yourself on RapidShare, you should provide a link to the original file: http://iphone-elite.googlecode.com/svn/trunk/ZiPhone.zip
It is most likely to be updated and less likely to go dead. A RapidShare file could be a 'backup' offer.

Renaming it doesn't help consistency either :) It should be ZiPhone.zip
This is exactly why people stop helping others. <sigh>


For the record the file listed in this guide is up-to-date and was modified to help the members of this forum. You wanna use the command line, go write your own damn guide.

[rennyn]

This is exactly why people stop helping others. <sigh>


For the record the file listed in this guide is up-to-date and was modified to help the members of this forum. You wanna use the command line, go write your own damn guide.

I was trying to be nice, no need to be a jerk about it.

You have taken someone else's work and are taking credit for it. I very politely and in a friendly manner suggested that you credit them and you attack me for.

*shrug* Whatever floats your boat.

[x666x]

This is exactly why people stop helping others. <sigh>

For crediting their source? Color me confused.

As a part-time writer I think rennyn has a valid point.

Edit- Tinman did give Zibri full credit in another thread. Zibri's instructions are also less informative and does not include the cmd files. I think its at TM's digression to credit as he sees fit here.

[Listerman]

Rennyn, he just made a walkthrough. Did not take credit for the creation of this glorious jailbreak/unlock/activate.

Tinman, does my windows PC need iTunes if I fully restore to 1.1.3 on my Mac?

[iamse7en]

Haha... This is what happens when someone jumps in the middle of your conversation. Never thought these forums could replicate every day life so well...

Tinman was the first to give credit where it was due. He announced its release (http://www.everythingicafe.com/forum/iphone-modifications/full-1-1-3-jailbreak-released-22691.html#post190196), tried it out for us all, then writes a great guide (http://www.everythingicafe.com/forum/iphone-modifications/how-to-easily-jailbreak-1-1-3-with-the-full-jailbreak-windows-mac-22696.html) for us.

[Tinman]

Haha... This is what happens when someone jumps in the middle of your conversation. Never thought these forums could replicate every day life so well...

Tinman was the first to give credit where it was due. He announced its release (http://www.everythingicafe.com/forum/iphone-modifications/full-1-1-3-jailbreak-released-22691.html#post190196), tried it out for us all, then writes a great guide (http://www.everythingicafe.com/forum/iphone-modifications/how-to-easily-jailbreak-1-1-3-with-the-full-jailbreak-windows-mac-22696.html) for us.

Thank you much for pointing that out.



--
Mike

[rennyn]

Tinman was the first to give credit where it was due. He announced its release (http://www.everythingicafe.com/forum/iphone-modifications/full-1-1-3-jailbreak-released-22691.html#post190196), tried it out for us all, then writes a great guide (http://www.everythingicafe.com/forum/iphone-modifications/how-to-easily-jailbreak-1-1-3-with-the-full-jailbreak-windows-mac-22696.html) for us.

You're right, he did in that post and on his blog, as is proper. But this is a completely separate post and the very foundation for this guide is a release made by someone else. Most likely this post will get a lot of attention and a lot of people will be reading it. It is only fair to Zibri who created and released this jailbreak to get full credit for it in the original post.

I made a simple, polite - even friendly - request, it is that simple.

Oh, and nobody was "[jumping] in the middle of your conversation". It isn't your conversation or anyone else's. This is a public forum and anyone can, and should, feel free to comment.

[hydro94530]

Hi guys, don't mean to interupt. So I had asked if I should re-jailbreak and then try ti install SSh and BSD from my home Wi-Fi. I went ahead re-broke and will try this. My last question for now is this. Is it okay if I do my jailbreaking using WinSCP and whatnot from a PC that does NOT have my iTunes account on it now that I have successfully jailbroke, or does it have to be the same PC?

Reason I am asking is that my Wi-Fi at work may be the problem with me getting download errors in installer, but my iTunes is also here at work. If I can successfully install those apps at home, can I just use my home PC for WInSCP and any other jailbreak related stuff I may want to do (install roms, themes, etc.) without iTunes installed there? Thanks in advance, and BTW, Tinman and other helped me a bunch in this thread, so I don't see the need to start all this drama.

[Tinman]

Rennyn, he just made a walkthrough. Did not take credit for the creation of this glorious jailbreak/unlock/activate.

Tinman, does my windows PC need iTunes if I fully restore to 1.1.3 on my Mac?

I would imagine it does indeed need iTunes.



--
Mike

[Listerman]

Does 7.6 iTunes on Windows work fine or is 7.4.2 required like the Mac?

[x666x]

You're right, he did in that post and on his blog, as is proper. But this is a completely separate post and the very foundation for this guide is a release made by someone else. Most likely this post will get a lot of attention and a lot of people will be reading it. It is only fair to Zibri who created and released this jailbreak to get full credit for it in the original post.

I made a simple, polite - even friendly - request, it is that simple.

Oh, and nobody was "[jumping] in the middle of your conversation". It isn't your conversation or anyone else's. This is a public forum and anyone can, and should, feel free to comment.

I feel ya, but give TM some credit here. He's the one fielding questions on the install process here, not Zibri.

His reply was curt, but again how many questions has he already accounted for in this thread? Lol

[Tinman]

Does 7.6 iTunes on Windows work fine or is 7.4.2 required like the Mac?

7.6 is fine.



--
Mike

[Listerman]

Thanks, trying this tonight when I get home from work.

Are there any tutorials for installing things and applications for JB iPhones

[diverdown]

7.6 is fine.



--
Mike

Mike,

I am a newbie when it comes to this type of stuff on my iphone, so please bear with me. i have read the entire thread and just want to clarify my questions...

First, I have an AT&T iphone that has never been jailbroken and is running 1.13 and I use my Mac to sync.

Since I am already on 1.13, must I restore? If not, can I just download the jailbreak file and run it on my windows box (if this is correct i am supposing that i would be at step 4 of your guide)

#5 states that I will have Installer and springboard, as I have never jailbroken before, are these installed during the jailbreak?

Lastly, once JBed, can I then sync with my Mac as I used to?

Thanks in advance, soory for the long post.

~Stephen

[Tinman]

I feel ya, but give TM some credit here. He's the one fielding questions on the install process here, not Zibri.

His reply was curt, but again how many questions has he already accounted for in this thread? Lol

The elepant in the room is that Zibri has been accused of stealing this jb. And has been pointed out already this guide is an off-shoot of of the thread regrarding the original announcement.

That said that wasn't the reason for my reply: it was the BS about modifying the distro. All I did was add a few batch files to make it easier for everyone to use and I get grief over it.


--
Mike

[musicmanmu]

Related to the previous post,

How will we know if our iPhones are safe to put through this method? I mean, it was mentioned that you had to have a certain bootloader on the phone, but I'm not sure how to check that on my phone?

For example, I have a phone (purchased back in August 2007 originally running 1.0.2) that is now running 1.1.3. Will I be able to jailbreak with this method?

Thanks!

[Raziel256]

I did full restore to 1.1.3 via iTunes, run unlock.cmd then i disconnect it from the USB cable, then i hold down Menu button while connecting it to the USB cable. When the iTunes logo appears i let go of the Menu button. all good as the guide until the phone reboot and am still on the the slide menu sooo what am doing wrong ?

-I have vista Ultimate
-Iphone S/N:7T737
-Idon't have ATT sim card

[Tinman]

Related to the previous post,

How will we know if our iPhones are safe to put through this method? I mean, it was mentioned that you had to have a certain bootloader on the phone, but I'm not sure how to check that on my phone?

For example, I have a phone (purchased back in August 2007 originally running 1.0.2) that is now running 1.1.3. Will I be able to jailbreak with this method?

Thanks!
This works with any iPhone-- from those purchased on iDay to those purchased just today.



--
Mike

[rennyn]

The elepant in the room is that Zibri has been accused of stealing this jb. And has been pointed out already this guide is an off-shoot of of the thread regrarding the original announcement.

That might be the case, but it is not relevant to my original request.

That said that wasn't the reason for my reply: it was the BS about modifying the distro. All I did was add a few batch files to make it easier for everyone to use and I get grief over it.

Nobody gave you grief, you're just creating drama and resorting to personal attacks. Fact of the matter is you got this jailbreak from somewhere else, took it, added a couple files, then in this post (Which stands by itself, other posts don't matter, this is what will turn up in searches) you fail to credit your original source.

You were politely asked/reminded to do so.

You threw a fit instead of acknowledging it.

Whatever floats your boat man, I'm done with this topic. :rolleyes:

[musicmanmu]

Well, I contend that Tinman did not try to pass this method off as his own; I believe he even mentioned ZiPhone and the source in a seperate post. He was just kind enough to create a guide for the lay user (like myself).

By the way, it worked great for me. You rock.

rennyn, if you had looked at his other post you would've saw that.

Now kiss and make up. :2cool:

[vipaccord]

i cant get customize to work. is there anything i have to do to get to work?

[Doby45]

Thanks for the great guide Tinman. Mine went through like a champ and I am on Vista Ultimate.

[diverdown]

Well, I contend that Tinman did not try to pass this method off as his own; I believe he even mentioned ZiPhone and the source in a seperate post. He was just kind enough to create a guide for the lay user (like myself).

By the way, it worked great for me. You rock.

rennyn, if you had looked at his other post you would've saw that.

Now kiss and make up. :2cool:


Musicmanmu,

I had the post directly above yours and was wondering if you did this on a non-jailbroken phone?

[lman]

so i have a jailbroken 8gb...using the method the dev team released beforehand. Whats the advantage of doing this? Are they all going to work when sdk comes out? If i need to use ifuntastic to edit should i not restore and rejailbreak with this method.

Basically is this just an easier way to accomplish what the other jailbreaks did and to restore is pointless, or restoring and using this method puts you in a better position for the future?


Is it working for macs yet? Where can we look to see when it is working for macs?

How do you make sure that there is a backup of your contacts and such so that after you jailbreak you can reboot it? Last time i did it, it said the file was corrupt...

Thanks in advance

[Raziel256]

I did full restore to 1.1.3 via iTunes, run unlock.cmd then i disconnect it from the USB cable, then i hold down Menu button while connecting it to the USB cable. When the iTunes logo appears i let go of the Menu button. all good as the guide until the phone reboot and am still on the the slide menu sooo what am doing wrong ?

-I have vista Ultimate
-Iphone S/N:7T737
-Idon't have ATT sim card


Plzz help am stuk on slide lock menu

[Mini-Master2000]

i'm a complete noob, so bear with me. I just bought the iPhone yesterday, so I'm assuming its 1.1.3. It is locked and unactivated, so is this new jailbreak method right for me to unlock it?

[nikeplayer222]

Anyone else have trouble running customize on this jailbreak? I get summerboard themes to work but i can't get anything on customize to show up? am i just a noob missing something?

[diverdown]

OK.....here i go again being the extreme newbie......

I did the Jailbreak and now have Installer on my home screen.....

Here the $64,000.00 question....

Now What.....

What do I install

[jaydoc1]

That might be the case, but it is not relevant to my original request.



Nobody gave you grief, you're just creating drama and resorting to personal attacks. Fact of the matter is you got this jailbreak from somewhere else, took it, added a couple files, then in this post (Which stands by itself, other posts don't matter, this is what will turn up in searches) you fail to credit your original source.

You were politely asked/reminded to do so.

You threw a fit instead of acknowledging it.

Whatever floats your boat man, I'm done with this topic. :rolleyes:


You know what, you've been a member of this forum for about 26 seconds so because that qualifies you as not knowing s**t from shinola maybe some people are willing to give you a pass, but not me. There are a few standout guys on this site that contribute tremendous amounts of their time and energy to it and Mike is one of those.

Mike is one of the biggest contributers to this site and one of the nicest guys you'll ever talk to. Now for those of us who appreciate all his hard work to make jailbreaks as easy as possible for us, and who also appreciate
that he does this all for free, and who also appreciate the fact that he always gives credit where credit is due and never has a disparaging remark for anyone else, please kindly STFU. I'm not sure what little hacker nerve you got twanged but that's enough out of you for this thread.

BTW, welcome to the forum. :smile:

[nikeplayer222]

OK.....here i go again being the extreme newbie......

I did the Jailbreak and now have Installer on my home screen.....

Here the $64,000.00 question....

Now What.....

What do I install

you can install what ever you'd like. The first main two are "summerboard" and "customize". Packages are made for those two applications. Then it's up to whatever you want. I personally jailbroke in order to get themes to customize, i don't use a lot of the apps. Games are always fun too. Just click on install in the upper right hand corner :)

[diverdown]

you can install what ever you'd like. The first main two are "summerboard" and "customize". Packages are made for those two applications. Then it's up to whatever you want. I personally jailbroke in order to get themes to customize, i don't use a lot of the apps. Games are always fun too. Just click on install in the upper right hand corner :)


I installed Customixe, but when I go into it, every choice is blank...do i need to install anything else....?

Thanks for the help.

[chris]

Just a friendly reminder to all to keep things civil. Discuss the issue(s) and please don't make things personal.

Thanks...

[nikeplayer222]

I installed Customixe, but when I go into it, every choice is blank...do i need to install anything else....?

Thanks for the help.

Yes, under "install" there are packages labeled "themes (Ucstomize)" anything in there with the green star on the package is available for download. Each package doesnt fulfill everything is the customize program though. But once you download one of those, it will show up in customize. After that, i am having trouble myself by getting it to actually show up on my phone. I dont think you can run customize and summerboard.

[enigmanic]

Jailbreak went without a hitch. Thank you for making the guide super simple, Tinman.

I've encountered one problem so far: the Mail application no longer works. It just crashes. Does anyone else have the same problem?

[hinzy]

Jailbreak went without a hitch. Thank you for making the guide super simple, Tinman.

I've encountered one problem so far: the Mail application no longer works. It just crashes. Does anyone else have the same problem?

Read through the thread... it's been brought up already and i think someone posted a fix within this thread.

check out x666x post on page 11....

[diverdown]

Thanks Nikeplayer....

I also wanted to express thanks to Tinman for posting this thread. I have been wanting to jailbreak for a long while (pretty much since I got my iphone in September) but the process always seemed so tedious and difficult.

This process was extremely simple. Again, thanks Tinman.

~Stephen

[enigmanic]

Read through the thread... it's been brought up already and i think someone posted a fix within this thread.

check out x666x post on page 11....

Thanks hinzy...I must have accidentally skipped over that page.

[nikeplayer222]

Can anyone help me on my Customize problem? I downloaded the packages and them set them in customize, but then nothing happens. Do i have to restart my phone at a certain point? or uninstall summerboard?

[iamse7en]

Is it working for macs yet? Where can we look to see when it is working for macs?

I really like the iClarified Tutorials (http://www.iclarified.com/entries/index.php?caid=2&scid=11). They have a ZiPhone (Mac) Tutorial (http://www.iclarified.com/entry/index.php?enid=664) for unlocking the phone. Keep an eye on it for updates. Some have reported it works, some ran into problems. Let me know!

Also, I found a few that say iRadio works fine on their 1.1.3, other say it doesn't. Wonder what the variable is. I'm going to update soon. I haven't touched my phone since 1.0.1. I just hope the new firmware doesn't screw us over. iPhoneAlley reports a possible "unbreakable" firmware (http://www.iphonealley.com/news/unbreakable-firmware-flash-support-coming-alongside-iphone-sdk?). Yeah RIGHT!

[hinzy]

Can anyone help me on my Customize problem? I downloaded the packages and them set them in customize, but then nothing happens. Do i have to restart my phone at a certain point? or uninstall summerboard?

From everything i've read, customize doesn't work on 1.1.3 yet.

I did read something about a modified version that works but i didn't try it cause i thought it better to wait for the original.

There was also people saying that it works for them but they ran the nate true version of jailbreak.

[nikeplayer222]

ooo, alright. Thanks for responding so quickly. Will a patch or some update come out for this eventually?

[diverdown]

ooo, alright. Thanks for responding so quickly. Will a patch or some update come out for this eventually?

summerboard is working for me....

[hinzy]

ooo, alright. Thanks for responding so quickly. Will a patch or some update come out for this eventually?

i dont claim to be of any knowledge about this but i would say that it all depends on how much work the developer wants to put in before the new sdk is released. some developers might be playing the waiting game.

[hinzy]

ooo, alright. Thanks for responding so quickly. Will a patch or some update come out for this eventually?

if you want to try it.. here is one of the threads

http://www.everythingicafe.com/forum/third-party-applications/modified-customize-from-skylar-causes-problems-22633.html

another

http://www.everythingicafe.com/forum/iphone-modifications/customize-on-1-1-3-doesn-t-seem-to-work-22693.html

[blacklabel775]

Looks like there is a stable version of the 1.1.3 Jailbreak for Macs now. I just ran it on mine and worked fine. It's easy, but requires some use of the Terminal application.

Read more about it and download the file here:
http://despreiphone.wordpress.com/2008/02/12/111-oob-to-113-jailbreak-activate-and-unlock/

Note:
Don't worry about the 1.1.1 to 1.1.3 title, start from fresh restored 1.1.3 and go from there (just like in Tinman's guide) ---> Thanks Tinman
I unplugged my iPhone before powering it off (not sure if order matters)
I ran ....ziphone -j first to jailbreak, and then had to run .....ziphone -a to activate.

Good luck.

[bluedrib]

am i the only one who cannot connect to youtube after doing zibri ziphone jailbreak?

[MileHiPhone]

Is anyone else having difficulty getting the rapidshare site to come up in order to download the JB?

Thanks. Especially to Tinman!

[uPhone559]

tried restoring 3 times already and ran jailbreak on windows, it runs screen turns blue, than done! and no installer on screen....

[x666x]

tried restoring 3 times already and ran jailbreak on windows, it runs screen turns blue, than done! and no installer on screen....

I've just jailbroke 2 phones using this method, a 3rd later this evening. I did not see a blue screen on the first two at all, are you sure you got into the recovery mode correctly?

I'm sure you've done it plenty of times by now, but just to recap, remove phone from dock, hold the power button, then slide to power off when prompted. Press and hold the Home button and place the phone into the dock. In no more than 5 seconds your iphone will show a connect to iTunes screen, and the jailbreak should take over from there.

[brzman1]

What works:
iTunes movie rentals (didn't work before under either jailbreak method)
BSD subsystem 2.0
OpenSSH
Installer (duh!)
iNewsGroup 1.0.5
Scetches
iBlackjack
iSolitaire
FiveDice
iPhysics
Snake
Mobile Finder
Mobile Preview
Mobile TextEdit
Still checking... but pretty much everything that worked before still works.


What doesn't:
TuneWiki (didn't work before either--needs an update for mobile user)



Issues:

Restore mode:
Some people have trouble getting into restore mode. If so keep trying and make sure you turn the iPhone completely off first. Then, while holding down the Home button, connect the iPhone's USB cable. When the iTunes logo appears let go of the Home button.

If you still have trouble getting restore to work try DFU mode. Get into DFU (while connected via USB) by holding down Home and Sleep till the Apple logo appears. Then release Sleep and hold Home till the iTunes logo appears.



iBrickr/Funtastic act like the iPhone is still not jailbroken and they can't be used to transfer files:

This is due to afc2 not being started. It can be fixed by editing a single plist. See here:
http://www.everythingicafe.com/forum/190613-post83.html

Hey Mike, Question. My phone was working fine, but now there's no sound. meaning i can't hear when people call or they can't hear me. I did a full restore and nothing.

[hydro94530]

Hi guys, I really just need to know a couple things. Can I install and run WinSCP on a PC that doesn't have iTunes? Also, once I install BSD and SSH, I can then install the other programs I need to start moving files (themes, ROMS, icons) over via WInSCP right? Finally, if I want to create my own themes and icons, is there particular format and size they need to be? Any help would be appreciated, thank you.

[lman]

so i have a jailbroken 8gb...using the method the dev team released beforehand. Whats the advantage of doing this? Are they all going to work when sdk comes out?

Basically is this just an easier way to accomplish what the other jailbreaks did and to restore is pointless, or restoring and using this method puts you in a better position for the future?


Is it working for macs yet? Where can we look to see when it is working for macs?

How do you make sure that there is a backup of your contacts and such so that after you jailbreak you can reboot it? Last time i did it, it said the file was corrupt...

Thanks in advance

[callisto9]

wow, first let me say thanks in advance. seems like a great and friendly forum. i am going to attempt this on my 1.1.3 iphone (it was 1.1.2 ootb when i bought it) which has never had anything done to it. it's never been jailbroken or unlocked.

i get a little confused about this though:
1.) Perform a full restore to 1.1.3 via iTunes. You want to be on freshly restored 1.1.3.

i am at 1.1.3 right now (i upgraded to it the same day i bought my iphone). is it OK to start from this point? i've had the phone about two weeks.

and, do i have to worry about losing my contacts or anything when i do this? i notice on iClarified, they talk about the different commands like -j -u and such, but really, all i want to do is jailbreak the phone, not unlock it.

and, let's say worst case scenario, i mess this up...can i just go back to my virginized 1.1.3?

thanks in advance! can't wait to try this!

[blacklabel775]

enter this to login:

ssh root@youriphoneIPaddresshere

You'll be asked for a password and the letters will be invisible so be absolutely sure you type this in correctly: alpine

Hit enter and you'll be logged in!

I'm having no luck trying to ssh into my phone. Are you referring to the terminal application in Mac or the Term-v100 app for the iPhone. I have not had luck with either.

i get the following when i log into Term-v100
Password: alpine

Login Incorrect
Login: ssh root@192.168.xx
Password: alpine
Login Incorrect

Any suggestions?

[x666x]

The elepant in the room is that Zibri has been accused of stealing this jb. And has been pointed out already this guide is an off-shoot of of the thread regrarding the original announcement.

That said that wasn't the reason for my reply: it was the BS about modifying the distro. All I did was add a few batch files to make it easier for everyone to use and I get grief over it.


--
Mike

Yeah, I read the IRC chat logs for this distro, I'm sincerely torn between who to trust with these jailbreak methods. I have no problem flashing my phone and accepting the risks that come with it, but I do prefer that the software I'm flashing doesn't always come wrapped in a cloud of drama, which has consistently been the case with these jailbreaks. Whats the deal, I mean are Mac and PC hackers working together like putting Cat and Dog people into a tiny box and shaking it up to see what happens?

In any case, the "transparent" additions you've included in the repackage are really the glue that holds this "easy" redistribution together. It's a very nice time saver to double click a CMD file instead of launching a dos box through a run command, then browsing to your JB folder before you can finally execute the jailbreak and pass a flag along with that. It's also a HUGE TIME SAVER for people don't even know what DOS is, how to launch a dos box, or even know the basic DOS commands to navigate their hard drives... I completely understand your reasoning for repackaging, why teach people DOS when you don't have to?

[iamse7en]

Hey Mike, Question. My phone was working fine, but now there's no sound. meaning i can't hear when people call or they can't hear me. I did a full restore and nothing.

The same thing happened to me. The solution is funny: take your iPhone headphones, stick them in the jack, and out, and in (I know) just to clean out the headphone jack. The phone, due to dust or something, thinks there are headphones in, so speaker and earpiece are off.

I had the same problem, did this, and they worked immediately. If this doesn't work, take it to an Apple Store, with a fresh 1.1.3 firmware, no sign of jailbreak. :)

[x666x]

I'm having no luck trying to ssh into my phone. Are you referring to the terminal application in Mac or the Term-v100 app for the iPhone. I have not had luck with either.

i get the following when i log into Term-v100
Password: alpine

Login Incorrect
Login: ssh root@192.168.xx
Password: alpine
Login Incorrect

Any suggestions?

1) Is OpenSSH verified as installed when you view your "uninstall" tab in Installer?

2) I don't use Term-v100 myself, I do it through Leopard's Terminal in the Utilities folder

3) So your login attempts look similar to this?

Here's what mine looks like:

http://img254.imageshack.us/img254/2683/picture3ng8.png

[blacklabel775]

Yes, SSH is installed, and working, and turned on using netservices. I can connect using cyberduck.

In Mac OS 10.5.1 my terminal window gives me this:

Last login: Tue Feb 12 17:28:51 on ttys000
steve-xxxx-computer:~ SteveO$ ssh root@192.168.x.x
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ @@@@@@@@@
@ WARNING: REMOTE HOST IDENTIFICATION HAS CHANGED! @
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ @@@@@@@@@
IT IS POSSIBLE THAT SOMEONE IS DOING SOMETHING NASTY!
Someone could be eavesdropping on you right now (man-in-the-middle attack)!
It is also possible that the RSA host key has just been changed.
The fingerprint for the RSA key sent by the remote host is
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx.
Please contact your system administrator.
Add correct host key in /Users/SteveO/.ssh/known_hosts to get rid of this message.
Offending key in /Users/SteveO/.ssh/known_hosts:12
RSA host key for 192.168.x.x has changed and you have requested strict checking.
Host key verification failed.
steve-xxxx-computer:~ SteveO$

[ironmarshal]

Hi all. Got everything working except Mail. It keeps on crashing when i try to open it I have already restored my phone twice. Before i jailbreaked it, i tried out the Mail and got the same result, won't open. Any idea. Thanks in advance. Going nuts here!

[x666x]

Hi all. Got everything working except Mail. It keeps on crashing when i try to open it I have already restored my phone twice. Before i jailbreaked it, i tried out the Mail and got the same result, won't open. Any idea. Thanks in advance. Going nuts here!

Stop going nuts! (http://www.everythingicafe.com/forum/iphone-modifications/how-to-easily-jailbreak-1-1-3-with-the-full-jailbreak-windows-mac-22696-11.html#post190742)

@blacklabel775

Does this come up every time you try to connect? I would think once it acquired a new key it would stop doing this, but you're saying it doesn't?

Gonna go back to the basics, but how many times have you reinstalled OpenSSH by now? Any chance you powered down and back up since installing or uninstalling? I don't know exactly if SSH needs the system to be physically restarted for them to work, but I know some do -- Summerboard. Worth a shot if you haven't done so already.

[themanofthedark]

There is a GUI, more idiot-proof version now, released by Zibri.

Zibri, Geohot, and Nate True may be the coolest three people i have heard of.

[callisto9]

OMG OMG OMG i did it! a total n00b did it! it works flawlessly. i also unlocked my phone, too. 'cause i ran the wrong command first. LOL

so, installed SSH and BSD subsystem 'cause every place says i should. what do i need those for again?

google's locate me thing is not working. any idea about that? YouTube IS working. so far, so good! now what to install...this is my first time with a jailbroken phone...

[soilsample]

Trying to download the jailbreak zip file.
RAPIDSHARE sucks! Wouldn't allow my download without a premium account (Im on satellite internet and ISP looks suspicious)...... OK, its worth it, so I paypal the $6.90.

Get a message saying that it will take up to 1 week to get my login info!

Can somebody email the zip file to me?
Hit me with a PM and I'll give out my email addy.

Thanks
Donald

Never Mind I got it from somebody!
Thanks

[callisto9]

Trying to download the jailbreak zip file.
RAPIDSHARE sucks! Wouldn't allow my download without a premium account (Im on satellite internet and ISP looks suspicious)...... OK, its worth it, so I paypal the $6.90.

Get a message saying that it will take up to 1 week to get my login info!

Can somebody email the zip file to me?
Hit me with a PM and I'll give out my email addy.

Thanks
Donald

PM sent. :)

[lman]

If anyone could go back to thread 20 and address my questions that would be great. I really appreciate it. Thanks.

[Bone]

ok i have ran the program...apparently verthing is working correctly......then once i get to the part where it says working wait 45" nothing happens from there on out.........what am i doing wrong here???

EDIT: ok ive tried this five differnt times in which i had to restore the phone 5 times....still once i get to the screen with the connect to itunes logo after following all the steps nothing happens after it says working wait 45".......does this sound at all correct??

[callisto9]

a few more questions:

1) every time i install a program, it goes back to the spring board screen and then to the "slide to unlock". no big deal, but is this normal?

2) can someone give me a quick explanation as to what BSD subsystem and SSH are? i installed them, but i really don't know what they're for.

ifonebone: i think you just have to wait for the phone to restart and then look to see if installer is on your springboard. i just waited until i saw the phone restart.

[up10ad]

a few more questions:

1) every time i install a program, it goes back to the spring board screen and then to the "slide to unlock". no big deal, but is this normal?

2) can someone give me a quick explanation as to what BSD subsystem and SSH are? i installed them, but i really don't know what they're for.
1) After you finish an install session it has to reset your springboard so the newly installed apps are recognized, hence the 'slide to unlock'. Normal.

2) BSD and SSH are system services and servers/clients that offer basis support services for a number of other programs. They also allow you to make a shell or secure copy protocol connection to your phone with a terminal client or WinSCP. You might use this to directly add or change files on your iPhone.

[callisto9]

1) After you finish an install session it has to reset your springboard so the newly installed apps are recognized, hence the 'slide to unlock'. Normal.

2) BSD and SSH are system services and servers/clients that offer basis support services for a number of other programs. They also allow you to make a shell or secure copy protocol connection to your phone with a terminal client or WinSCP. You might use this to directly add or change files on your iPhone.

thank you so much. i appreciate it. :wink: i can't believe it was this easy! woot!

[up10ad]

Hi all. Got everything working except Mail. It keeps on crashing when i try to open it I have already restored my phone twice. Before i jailbreaked it, i tried out the Mail and got the same result, won't open. Any idea. Thanks in advance. Going nuts here!

See the post on page 11 of this thread for the mail fix. http://www.everythingicafe.com/forum/190742-post105.html

[brzman1]

1) After you finish an install session it has to reset your springboard so the newly installed apps are recognized, hence the 'slide to unlock'. Normal.

2) BSD and SSH are system services and servers/clients that offer basis support services for a number of other programs. They also allow you to make a shell or secure copy protocol connection to your phone with a terminal client or WinSCP. You might use this to directly add or change files on your iPhone.

I'm having an issue; maybe you or anyone can help. I'm taking a crap. For some unknown reason, I can get sound when i lock or unlock my phone. no big deal, but People can't hear me and I can't hear them. Hence, When i call out, i don't even hear the ring tone. Please help.

[Bone]

ok i have ran the program...apparently verthing is working correctly......then once i get to the part where it says working wait 45" nothing happens from there on out.........what am i doing wrong here???

EDIT: ok ive tried this five differnt times in which i had to restore the phone 5 times....still once i get to the screen with the connect to itunes logo after following all the steps nothing happens after it says working wait 45".......does this sound at all correct??

has anyone else had this problem??

[ironmarshal]

See the post on page 11 of this thread for the mail fix. http://www.everythingicafe.com/forum/190742-post105.html

I just tried. Installed Terminal then typed in after the $ "chown -R mobile /var/mobile/Library/Mail" still crashes. Am i doing it wrong???

[callisto9]

has anyone else had this problem??
does your phone reboot ever? the command prompt won't do anything. it'll just stay there saying "wait 45"", but does your iphone eventually reboot and go to the springboard?

[callisto9]

I'm having an issue; maybe you or anyone can help. I'm taking a crap. For some unknown reason, I can get sound when i lock or unlock my phone. no big deal, but People can't hear me and I can't hear them. Hence, When i call out, i don't even hear the ring tone. Please help.

there was someone earlier in this thread that said plugging in and removing their headphones fixed this issue. maybe try that?

[Bone]

does your phone reboot ever? the command prompt won't do anything. it'll just stay there saying "wait 45"", but does your iphone eventually reboot and go to the springboard?


no it never reboots it stays on the connect to itunes screen on the phone......i even waited til it turned in to the black apple logo screen...but never reboot

[brzman1]

there was someone earlier in this thread that said plugging in and removing their headphones fixed this issue. maybe try that?
I plugged in my headphones and i could hear the sounds, but when i pull them out, i hear nothing. i wonder if it's moisture, and how do i clear that. time?

[wesexcellence]

I love the update however I no longer have my custom ringtones from IphoneRinger.
They show up on my phone but are inaudible.

[callisto9]

no it never reboots it stays on the connect to itunes screen on the phone......i even waited til it turned in to the black apple logo screen...but never reboot
and you've tried the process several times? what firmware are you using? 1.1.3?

[Joker]

A simple how-to (Windows/Mac):
Update (02/11/2007 6:01 PM MST): The Mac version has been withdrawn. There should be a Mac version out shortly.


1.) Perform a full restore to 1.1.3 via iTunes. You want to be on freshly restored 1.1.3. Don't bother syncing to iTunes, you can do that later. You can accept to restore from your previous backup now, or wait till your finished jailbreaking 1.1.3.

http://www.ctaz.com/%7Emlynch/x/jb1.png



2.) Download jailbreak113full.zip (http://rapidshare.com/files/91213143/jailbreak113full.zip.html)(download updated 2/11/2007 6:01 MST) and extract its contents into a folder on your computer. Under Windows I recommend creating the folder c:\113jb and extracting the contents there.

3a.) Windows: Open "My Computer" and navigate to c:\113jb, or wherever you extracted the contents of jailbreak113full.zip. Double-click jailbreak.cmd.

http://www.ctaz.com/%7Emlynch/x/jb2.png



3b.) Mac: Open a terminal window and navigate to the folder you extracted jailbreak113full.zip into. Type ziphone j to jailbreak. (Might need to chmod 777 the files first.) *** Edit 02/11/2007 6:01 PM MST: As of version 3 of the jailbreak (already updated in the download link) the Mac version has been withdrawn. It will be updated when it is stable enough ***

4.) You will be prompted to put the iPhone into restore mode. The on-screen instructions may not be clear. Do not put it into DFU mode! Turn the iPhone off, disconnect it from the USB cable, then hold down Home button while connecting it to the USB cable again. When the iTunes logo appears let go of the Home button.

http://www.ctaz.com/%7Emlynch/x/jb3.png


5.) That's it! You will have Installer on your springboard. Enjoy. (The actual jailbreak process takes less than 5 minutes!)


Success! By FAR this was way easier than the previous jailbreak methods.



--
Mike
Thank's,It took less than 2 min to do.

[mobilehavoc]

I'm having no luck trying to ssh into my phone. Are you referring to the terminal application in Mac or the Term-v100 app for the iPhone. I have not had luck with either.

i get the following when i log into Term-v100
Password: alpine

Login Incorrect
Login: ssh root@192.168.xx
Password: alpine
Login Incorrect

Any suggestions?

Have same problem, can connect fine remotely via WinSCP and Putty but not using Term-VT100.

[mobilehavoc]

What hasn't worked for me so far:
- MobileChat and Apollo both install fine and run but can't connect to servers
- iFlix just launches to a blank white screen
- WeTool-US just launches and returns to Springboard
- TermVT100 issue with wrong password/not able to log in
- TuneWiki installs and launches fine, plays music fine but everything just says No Lyrics Yet.

What's working:
- Summerboard w/Themese
- Services
- ScummVM
- ToDoList
- Lockbox
- Mobilecast
- VoiceDial
- Pushr
- CrossWalk

[uPhone559]

I've just jailbroke 2 phones using this method, a 3rd later this evening. I did not see a blue screen on the first two at all, are you sure you got into the recovery mode correctly?

I'm sure you've done it plenty of times by now, but just to recap, remove phone from dock, hold the power button, then slide to power off when prompted. Press and hold the Home button and place the phone into the dock. In no more than 5 seconds your iphone will show a connect to iTunes screen, and the jailbreak should take over from there.


Thanks! It worked perfect once I used the "dock". Didn't think that made a difference

[enigmanic]

What hasn't worked for me so far:
- MobileChat and Apollo both install fine and run but can't connect to servers
- iFlix just launches to a blank white screen
- WeTool-US just launches and returns to Springboard
- TermVT100 issue with wrong password/not able to log in
- TuneWiki installs and launches fine, plays music fine but everything just says No Lyrics Yet.


For Apollo, see this fix, which worked for me:
http://www.everythingicafe.com/forum/third-party-applications/apollo-fix-for-1-1-3-a-22734.html

[kenny]

First off thanks tinman for contributing to the board. Your unselfish time you are putting to help us out is appreciated. I always say, if you aren't contributing, you're hurting.

Second, the replies to the help seemed mostly answered except for the unlocking issues with other carriers. Does this method unlock the phone for use with other carriers after the jailbreaking? Does this work on 1.1.1 otb phones? the unlocking function seems to only work with the 4.6bl or 1.1.2 or 1.1.3 phones. Please advise

[callisto9]

Second, the replies to the help seemed mostly answered except for the unlocking issues with other carriers. Does this method unlock the phone for use with other carriers after the jailbreaking? Does this work on 1.1.1 otb phones? the unlocking function seems to only work with the 4.6bl or 1.1.2 or 1.1.3 phones. Please advise

i think if you look in the folder you unzipped all your files to, you'll see one called unlock and one called jailbreak. i ran both (one after the other). one is to unlock the phone (though i didn't mean to, but can't test it) and the other to jailbreak.

i believe this method ONLY works with 1.1.3 phones. meaning, you have to either have a 1.1.3 ootb phone or have upgraded to that firmware via itunes. i had a 1.1.2 ootb phone and upgraded to the 1.1.3 firmware the first day i had it. i did this jailbreaking method and had no problems whatsoever.

hope this helps.

[blacklabel775]

@blacklabel775

Does this come up every time you try to connect? I would think once it acquired a new key it would stop doing this, but you're saying it doesn't?

Gonna go back to the basics, but how many times have you reinstalled OpenSSH by now? Any chance you powered down and back up since installing or uninstalling? I don't know exactly if SSH needs the system to be physically restarted for them to work, but I know some do -- Summerboard. Worth a shot if you haven't done so already.

Well, I finally got it working from some help over at the MMi forums. If anyone else is having trouble ssh-ing into their phone using terminal in mac, type the following:

rm /Users/[Your User Name]/.ssh/known_hosts

into the terminal. This basically forces SSH to recreate a known_hosts file. Then try the ssh root@xxx.xxx.x.x command, and it should work.

[Hawk]

I think this will help some of the people that are having problems entering into recovery mode.
When the instructions say to turn off the phone and hold the home button as you connect to the dock or cord, KEEP HOLDING IT. The logo you are waiting for is NOT the apple logo. It's the Connect to iTunes logo which takes a few seconds after the Apple logo comes up.
I guess I was not reading the instructions correctly.
Everything is nice and easy from there.


Now, one thing I am looking for is a WORKING fix for iPhysics levels. Anyone?
The repo.tiny-code.com source and fix is not working for me. I keep getting "main Script execution Failed"

[Bone]

and you've tried the process several times? what firmware are you using? 1.1.3?

yep otb 1.1.3.........

[callisto9]

yep otb 1.1.3......... do you ever get to the image (on your phone) of the itunes logo and the white USB cable?

[dodgeboy23]

Hey guys, i need help bigtime. I tried restoring my phone to i can update it to the new firmware but i keep getting an itunes error 1603. what can i do to fix this? i dont care what firmware i'll be on as long as it runs. PLEASE

[iamse7en]

What hasn't worked for me so far:
- MobileChat and Apollo both install fine and run but can't connect to servers
- iFlix just launches to a blank white screen
- WeTool-US just launches and returns to Springboard
- TermVT100 issue with wrong password/not able to log in
- TuneWiki installs and launches fine, plays music fine but everything just says No Lyrics Yet.

Chat programs work great with the fix.
To fix TermVT100: Installer.app-->Tweaks (1.1.3)-->SUID Lib Fix
Now password alpine works fine.

If anyone finds a thread that finds a possible fix for iRadio in 1.1.3, please let me know! PM or googletalk theaustinpeay

Also... snesx4iphone works great... I installed the Roms through mobile path, but NES doesn't work. I moved my Roms to the mobile path all correctly, even changed the owner to mobile, but NES still says it can't find roms... I remember someone saying something about a symlink? What is that, how do I do that (using Fugu to ssh on my Mac) and why don't I have to do that for snesx4iphone? I had NES installed before, but not snesx4iphone. TIA.

Update: NES works fine now. I didn't have the new NES (http://www.zdziarski.com/projects/nesapp/) (2.0.4 or 2.0.5) to play the games through the mobile path.

[ironmarshal]

Thanks, that fixed my Mail problem! Has been bugging all night long. I can now sleep in peace.

[up10ad]

there was someone earlier in this thread that said plugging in and removing their headphones fixed this issue. maybe try that?
My wife's iPhone also sometimes loses all sound when making calls and it is a headphone jack issue, she can get it to work again by plugging in the headphones several times quickly and removing them. If this is the issue brzman1 is having, it isn't related to the JB.

[up10ad]

...The apps that don't work for me yet are iRadio and iFlix. iRadio just opens to a blank screen and closes, and iFlix opes to a blank screen, sits about 30 seconds and closes.

For iFlix, this is apparently a right issue, there is a Installer fix available. Add the source repo.tiny-code.com and apply the iFlix fix. Unfortunately, that same source has a fix for iPhysics but the script fails executeion for me.

[Doby45]

The only issue I have found is that my Visual Voicemail no longer works. When I click on the Voicemail icon while in the Phone application it just dials my voicemail instead of opening the VVM app.

EDIT: Solution found. I had Hawk call me and leave a VM. It asked me to put my VM password in and then it would open the Visual VM portion of the Phone app. So just have someone call ya up and leave you a message.

[Too Many Secrets]

This JB method worked nicely. Thanks TINMAN.

Proggys not working for me:
Stumbler
Taskbar Notifier
iFlix
Customize (it opens, but I can't get my 5 icon dock back).

[Hawk]

This JB method worked nicely. Thanks TINMAN.

Proggys not working for me:
Stumbler
iFlix
Customize (it opens, but I can't get my 5 icon dock back).
Add the following source and use the iFlix fix
http://repo.tiny-code.com

[x666x]

For iFlix, this is apparently a right issue, there is a Installer fix available. Add the source repo.tiny-code.com and apply the iFlix fix. Unfortunately, that same source has a fix for iPhysics but the script fails executeion for me.

Manually fix iPhysics:

iPhyics Level Fix for firmware 1.1.3
This fix performs the following UNIX commands on install and reinstall to set the right ownership of the iPhysics data folder.

chown -R mobile:mobile /private/var/root/Media/iPhysics

This way when you launch iPhysics as the user mobile it can read the levels.

[Too Many Secrets]

Add the following source and use the iFlix fix
http://repo.tiny-code.com

I get "main script execution error" when trying to install after iFlix is installed. I've unistalled iFlix a couple times and tried to re-run the fix, but I still get this error. Tried rebooting phone, nothing. Am I doing something wrong? Do I need to install the fix before the proggy?

[Hawk]

No, I don't think you are doing anything wrong, I think there is a problem with the source/site.
I tried emailing him, but have not received a response as of yet. I did notice that during my attempts to get it to work last night, that an additional app was added, but I think that this might end up being a long term problem.

*!*!**!*!*!*!*!*! UpDate!!!

Tiny-Code has pulled their fixes for legal reasons since they are now working with Apple for the 1.1.4 firmware, and software distribution through iTunes after the SDK is released.

*!*!*!*!**!*!*!*!*!*!

[Tinman]

First off thanks tinman for contributing to the board. Your unselfish time you are putting to help us out is appreciated. I always say, if you aren't contributing, you're hurting.

Second, the replies to the help seemed mostly answered except for the unlocking issues with other carriers. Does this method unlock the phone for use with other carriers after the jailbreaking? Does this work on 1.1.1 otb phones? the unlocking function seems to only work with the 4.6bl or 1.1.2 or 1.1.3 phones. Please advise
As of the latest update it supposedly can unlock both BL 3.9 and 4.6--according to Zibri. I have not tested this, however.


--
Mike

[14miles]

Hi I completed this hole process and do not have the sringboard on y iPhone or iTunes. I did it 2 ways the first which was through DOS on my machine then I used the GUI and both said "Done!" but the iphone reboots and appears to not be unlocked. I could use some help.