KNK Goes 1.1.3 Down 1.1.1 to 1.1.2 Then 1.1.3

[KNK]

As you know I said I would wait a few days before jailbreaking the 1.1.3 so I waited until last night. I used this howto which was excellant. (http://planet-iphones.com/forums/index.php?topic=663.0) I originally saw it on MMI but that place is either so slow or is down, so I found the same poster "Sidetalker" at the site ref there.

I started with a restored phone at 1.1.3 I clicked off all my music, movies etc, till there was nothing on the phone but about 211 mb of other. So it is important to go back to 1.1.1 then to 1.1.2 jailbroken because it prepares the phone for the soft update to 1.1.3. I used this howto for the nates (http://planet-iphones.com/forums/index.php?topic=663.0)update which was better than his.

The downgrade to 1.1.1 then to 1.1.2 took me 70 minutes this morning without a hic cup.:smile: (Just a NOTE I only had 21mb of Other at this point)
The soft update took about 30 minutes of mostly waiting and great sucess:gasp::2cool:

After I got back to 1.1.3 my contacts were there and I had to enter all my password settings etc. I synced back my music etc. All plays well, all sounds well, my custom ringtones work and sound we.

When I jailbroke at 1.1.2 I had my Installer icon, the BSB icon and SSH, but after the 1.1.3 the Installer was there updated to 3.0 but the BSB & SSH were gone. I installed the SSH but it does not show on my springboard??

My locate button works great in maps with Tinman's work-a-round.

I don't know if there is a work-a-round for the summerboard etc yet?

That is about it, if you needs help using my methods above then post them here.:smile:

[acosmichippo]

i hope this downgrading stuff doesn't become a crutch for the hackers.

i mean i don't want to have to downgrade to 1.1.1 and sequentially upgrade to 13.8.9 when it comes out.

[KNK]

i hope this downgrading stuff doesn't become a crutch for the hackers.

i mean i don't want to have to downgrade to 1.1.1 and sequentially upgrade to 13.8.9 when it comes out.


It was the only way for me to jailbreak again...thats the breaks.

[acosmichippo]

yeah i know. my point is that the hackers are spending their time using the downgrades to hack instead of looking for ways to hack the current software directly. granted, we get our phones JB-en quicker... but like i said, if i have to do all that to upgrade to 1.1.4 and 1.1.5 and x.x.x, then i probably won't mess with it in the future.

[patrickj]

When I jailbroke at 1.1.2 I had my Installer icon, the BSB icon and SSH, but after the 1.1.3 the Installer was there updated to 3.0 but the BSB & SSH were gone. I installed the SSH but it does not show on my springboard??




Real quick way to tell if SSH is still installed / working is to just install the Services app. If it shows SSH there and lets you toggle it on/off, who needs a Springboard icon ...

[KNK]

Real quick way to tell if SSH is still installed / working is to just install the Services app. If it shows SSH there and lets you toggle it on/off, who needs a Springboard icon ...


Okay got it, so it shows up in the services, and shows that it is on so I just turned it off.

[patrickj]

Okay got it, so it shows up in the services, and shows that it is on so I just turned it off.

Cool. Yeah, I always just use Services to keep that toggled off except when I want to do a bit of file transfer etc. And Services seems to be running just fine on 1.1.3

[KNK]

Cool. Yeah, I always just use Services to keep that toggled off except when I want to do a bit of file transfer etc. And Services seems to be running just fine on 1.1.3


Now are we able to put the Themes in yet for those to work, and if so how. (Man I feel like a noob):gasp:

[patrickj]

Now are we able to put the Themes in yet for those to work, and if so how. (Man I feel like a noob):gasp:

Good question, I haven't tried out Summerboard or themes yet, though have seen some saying it works but with a few glitches - I'm kinda hoping there will be a new version release of it fairly soon ...

[KNK]

Good question, I haven't tried out Summerboard or themes yet, though have seen some saying it works but with a few glitches - I'm kinda hoping there will be a new version release of it fairly soon ...


I was looking for the Voice Dialer (but only found the voice app) do you know where I find it. Also did you get all you sounds to working??

[patrickj]

I was looking for the Voice Dialer (but only found the voice app) do you know where I find it. Also did you get all you sounds to working??

Yes, all my sound (ringtones, iPod music etc) are working fine now.
Voice Dial app = should be under the Productivity category ...

[KNK]

Yes, all my sound (ringtones, iPod music etc) are working fine now.
Voice Dial app = should be under the Productivity category ...


My volumn is like super load now (I already did the pin poke before) I mean I almost have to turn it down it is si loud.:gasp:

[mythrowbacknikes]

man im confused.. the guide says "1. To start off, you should be on 1.1.3 and you must have the 3.9 bootloader."

wtf? what is 3.9 bootloader? I have a untouched 1.1.3. iphone. srry for being a noob lol

[KNK]

man im confused.. the guide says "1. To start off, you should be on 1.1.3 and you must have the 3.9 bootloader."

wtf? what is 3.9 bootloader? I have a untouched 1.1.3. iphone. srry for being a noob lol


So you bought the phone already original at 1.1.3?

If so you can not jailbreak. I t is for phones purchased up thru week 45 and earlier. Sorry:gasp:

[mythrowbacknikes]

Actually I bought the iPhone at 1.1.2.. Then updated to 1.1.3 2 days after 1.1.3. update was released.

[Napoleon_PhoneApart]

My volumn is like super load now (I already did the pin poke before) I mean I almost have to turn it down it is si loud.:gasp:

I noticed that my brother's new iPhone upgraded to 1.1.3 is as loud as my 1.1.2 with the speaker shield removed.

[Napoleon_PhoneApart]

Actually I bought the iPhone at 1.1.2.. Then updated to 1.1.3 2 days after 1.1.3. update was released.

The jailbreak is only applicable to iPhones purchased out of the box with 1.1.1 or lower...

[Napoleon_PhoneApart]

As you know I said I would wait a few days before jailbreaking the 1.1.3 so I waited until last night. I used this howto which was excellant. (http://planet-iphones.com/forums/index.php?topic=663.0) I originally saw it on MMI but that place is either so slow or is down, so I found the same poster "Sidetalker" at the site ref there.

I started with a restored phone at 1.1.3 I clicked off all my music, movies etc, till there was nothing on the phone but about 211 mb of other. So it is important to go back to 1.1.1 then to 1.1.2 jailbroken because it prepares the phone for the soft update to 1.1.3. I used this howto for the nates (http://planet-iphones.com/forums/index.php?topic=663.0)update which was better than his.

The downgrade to 1.1.1 then to 1.1.2 took me 70 minutes this morning without a hic cup.:smile: (Just a NOTE I only had 21mb of Other at this point)
The soft update took about 30 minutes of mostly waiting and great sucess:gasp::2cool:

After I got back to 1.1.3 my contacts were there and I had to enter all my password settings etc. I synced back my music etc. All plays well, all sounds well, my custom ringtones work and sound we.

When I jailbroke at 1.1.2 I had my Installer icon, the BSB icon and SSH, but after the 1.1.3 the Installer was there updated to 3.0 but the BSB & SSH were gone. I installed the SSH but it does not show on my springboard??

My locate button works great in maps with Tinman's work-a-round.

I don't know if there is a work-a-round for the summerboard etc yet?

That is about it, if you needs help using my methods above then post them here.:smile:

Damn it! I've been trying to hold off, KNK, but the success of your jailbreak is pushing me hard to do it myself. Also, I've read that most of the apps I use on a regular basis work fine on 1.1.3.
Damn you! Damn you! :laugh2:

[mythrowbacknikes]

sucks for me then.

[x666x]

The whole downgrading process is a real chore for something that only half works at this point. I know there are a lot of bandaids out to patch the holes, but in the end, do you feel its been worth it?

I haven't really heard anyone touch upon that aspect of all this JBing, so I'm interested to know. I mean if I saw more "It was totally worth the effort" posts compared to "It went without a hitch but X or Y doesn't work" I think I'd be more inclined to jump onboard with yall.

The wait is keeling me

[patrickj]

The whole downgrading process is a real chore for something that only half works at this point. I know there are a lot of bandaids out to patch the holes, but in the end, do you feel its been worth it?

I haven't really heard anyone touch upon that aspect of all this JBing, so I'm interested to know. I mean if I saw more "It was totally worth the effort" posts compared to "It went without a hitch but X or Y doesn't work" I think I'd be more inclined to jump onboard with yall.

The wait is keeling me

It's been totally worth it. And that's coming from someone who (through my own laziness, my bad) did it the 'not ideal' way (going from 1.1.1 JBed to Nate's method) and did have a lot of issues via that method. But, once I did it from 1.1.2 JBed, it has been well worth it, and almost no issues - the Google Maps Find Me thing needs the Locate Me workaround is about all. Every single 3P app I've tried works sweet and I like 113 quite a bit ...

[wjp09]

I'm going to do this tonight *right now 7PM EST* I am going to put a tutorial video up at

www.youtube.com/techtutorials

It's been a while since I have done one.

[x666x]

It's been totally worth it. And that's coming from someone who (through my own laziness, my bad) did it the 'not ideal' way (going from 1.1.1 JBed to Nate's method) and did have a lot of issues via that method. But, once I did it from 1.1.2 JBed, it has been well worth it, and almost no issues - the Google Maps Find Me thing needs the Locate Me workaround is about all. Every single 3P app I've tried works sweet and I like 113 quite a bit ...

Thanks for posting, thats definitely good to know. I had read that there seemed to be more things that can go awry if you went from 1.1.1 to 1.1.3, as you've probably already experienced. I'm on 1.1.2 so I don't think I'll run into too much trouble, I hope, heh.

I'll have to look over the "working apps list" for 1.1.3 to see if all my favs are working, but from what I hear it sounds like theres only a few that don't. Argh, I'm tired of waiting for NervGas' JB and I've got a few hours free tonight to game out or jailbreak...

[patrickj]

Thanks for posting, thats definitely good to know. I had read that there seemed to be more things that can go awry if you went from 1.1.1 to 1.1.3, as you've probably already experienced. I'm on 1.1.2 so I don't think I'll run into too much trouble, I hope, heh.

I'll have to look over the "working apps list" for 1.1.3 to see if all my favs are working, but from what I hear it sounds like theres only a few that don't. Argh, I'm tired of waiting for NervGas' JB and I've got a few hours free tonight to game out or jailbreak...

More things go astray with going from 1.1.1 = definitely my experience. Working apps = hope yours are, I haven't got all of mine back on yet, but nothing has failed so far. If you do go for it tonight, best of luck!

[Napoleon_PhoneApart]

Well, I'm hung up at the point where my instructions say"

10. Jailbreak 1.1.2
Extract the 1.1.2 jailbreak package and open the windows.bat file
Tell it to boot your phone.The application is hanging at "waiting for reboot." Damn...

[x666x]

More things go astray with going from 1.1.1 = definitely my experience. Working apps = hope yours are, I haven't got all of mine back on yet, but nothing has failed so far. If you do go for it tonight, best of luck!

Thanks!

As luck would have it, NerveGas' JB was released and I decided to give that one a go. Worked on the first go without a hitch :)

Finally enjoying 1.1.3, but interestingly the first thing I tried out wasn't any of the new features, but getting my beloved PocketGuitar back on!

[KNK]

The whole downgrading process is a real chore for something that only half works at this point. I know there are a lot of bandaids out to patch the holes, but in the end, do you feel its been worth it?

I haven't really heard anyone touch upon that aspect of all this JBing, so I'm interested to know. I mean if I saw more "It was totally worth the effort" posts compared to "It went without a hitch but X or Y doesn't work" I think I'd be more inclined to jump onboard with yall.

The wait is keeling me


I don't know what you mean half works, everything is working for me fine, so far no problems and performance is great.:smile::2cool:

[KNK]

It's been totally worth it. And that's coming from someone who (through my own laziness, my bad) did it the 'not ideal' way (going from 1.1.1 JBed to Nate's method) and did have a lot of issues via that method. But, once I did it from 1.1.2 JBed, it has been well worth it, and almost no issues - the Google Maps Find Me thing needs the Locate Me workaround is about all. Every single 3P app I've tried works sweet and I like 113 quite a bit ...

I have to say that the google maps find me right on and really zoomed in, which did not do that before.:smile:

[KNK]

Well, I'm hung up at the point where my instructions say"

10. Jailbreak 1.1.2

Extract the 1.1.2 jailbreak package and open the windows.bat file
Tell it to boot your phone.The application is hanging at "waiting for reboot." Damn...


The problem is you need to go to java.com and get the java updated. I new of this long ago, so I did it first before I started.:smile:

[patrickj]

I have to say that the google maps find me right on and really zoomed in, which did not do that before.:smile:

Once I run Locate Me once, mine comes pretty close - within about a half a city block or something

[KNK]

Once I run Locate Me once, mine comes pretty close - within about a half a city block or something

I am in a medium coverage, so when I head into town I'll see how close it will get then. But for now, well satisfied.The only thing I have found that does not work is the typing, the double click of the arrow for ALL CAPS does not work. The double click for period does.:gasp:

[patrickj]

I am in a medium coverage, so when I head into town I'll see how close it will get then. But for now, well satisfied.The only thing I have found that does not work is the typing, the double click of the arrow for ALL CAPS does not work. The double click for period does.:gasp:

Double tap for CAPS toggle works for me, you turned it back on in settings and it just doesn't work?

[KNK]

Double tap for CAPS toggle works for me, you turned it back on in settings and it just doesn't work?

I'm an idiot forgot settings/general/keyboard:angry:

[patrickj]

I'm an idiot forgot settings/general/keyboard:angry:

Yup, I almost did too - coulda sworn it was On by default :smile:

[wjp09]

It says my "Your iPhone is not ready to upgrade. See "more info" "

Which is blank?

Im sure I'll figure it out and post my findings

[KNK]

It says my "Your iPhone is not ready to upgrade. See "more info" "

Which is blank?

Im sure I'll figure it out and post my findings


What is your firmware right now? Jailbroken? Your orig phone?

[wjp09]

1.1.2 JB

I had 1.0.2 JB.
Restored to 1.0.2 Default
Upgraded to 1.1.3 Default
Restored to 1.1.1 Default
Upgraded to 1.1.2 Default
Upgraded to 1.1.2 JB


Im trying the Nate True method now.

[KNK]

1.1.2 JB

I had 1.0.2 JB.
Restored to 1.0.2 Default
Upgraded to 1.1.3 Default
Restored to 1.1.1 Default
Upgraded to 1.1.2 Default
Upgraded to 1.1.2 JB


Im trying the Nate True method now.


You used the howto in my OP? And you were successful all the way thru?

You removed all your previous 3rd party apps?

[wjp09]

Yes. Yes. Yes

[KNK]

Yes. Yes. Yes


I would download the iBrickr 113 again, Also power down the phone and restart.

Can't see why it would not let you thru?

[wjp09]

Ok I have 1.1.3 JB now but it went, to say the least, not as planned.

On my phone I went to installer and and tried adding the 1.1.3
It started and froze mid way like it should have.
Then my phone crashed.
It said connect to itunes.
Itunes didn't recognize it.
I booted it thru iBrickr.
Phone turns on (1.1.2)
Phone soft resets to version 1.1.3
???
But it is working now and I'm fine with that.

[KNK]

Ok I have 1.1.3 JB now but it went, to say the least, not as planned.

On my phone I went to installer and and tried adding the 1.1.3
It started and froze mid way like it should have.
Then my phone crashed.
It said connect to itunes.
Itunes didn't recognize it.
I booted it thru iBrickr.
Phone turns on (1.1.2)
Phone soft resets to version 1.1.3
???
But it is working now and I'm fine with that.

Glad it worked. Yeah you do not need to be hooked up to iTunes at all for this. So I presume everything is working okay?

So you used the installer soft upgrade??

[patrickj]

Hey KNK, veering off a little here, but just to let you know, Voice Dial app is working sweet for me after 113 JB - 'bout 90% accuracy on a range of about 20 commands I've given it so far for apps / bookmarks / contacts - getting very few wrong, especially when I've bothered to get in a quiet environment to record them :smile:

[wjp09]

yeah its working.

Now Im just wondering about win SCP

Do I need to re run putty?

[patrickj]

yeah its working.

Now Im just wondering about win SCP

Do I need to re run putty?

WinSCP is working fine for me with the 113 JB. Maybe that's not what you were asking, but just in case ...

[KNK]

Hey KNK, veering off a little here, but just to let you know, Voice Dial app is working sweet for me after 113 JB - 'bout 90% accuracy on a range of about 20 commands I've given it so far for apps / bookmarks / contacts - getting very few wrong, especially when I've bothered to get in a quiet environment to record them :smile:

I have it for the contacts only right now and yeah works well, just need to get it for the home double tap.

[wjp09]

No it was what I was asking.

Is this information still the same?
HOST= Ip address assigned to iPhone
PORT=22
USERNAME=ROOT
PASS= DOTTIE
PROTOC.= SCP

[patrickj]

No it was what I was asking.

Is this information still the same?
HOST= Ip address assigned to iPhone
PORT=22
USERNAME=ROOT
PASS= DOTTIE
PROTOC.= SCP

All good except password - should be 'alpine'

[patrickj]

I have it for the contacts only right now and yeah works well, just need to get it for the home double tap.

Yup, I have assigned it to the Home double-tap - and quite like using it for some fave sites and apps ...

[wjp09]

alpine.
thats what I meant.
I remember seeing that change during the update.
But it still is refusing connection.

[patrickj]

alpine.
thats what I meant.
I remember seeing that change during the update.
But it still is refusing connection.

Make sure SSH is On, on the iPhone. I always just use the Services app for this, so you can toggle it On/Off easily via a GUI ...

[jacker28]

Thank you for the downgrade walkthrough link it worked great! I downgraded from 1.1.3 all the way through a jailbroken 1.1.2, then i did the jailbreak to get to a jailbroken 1.1.3, but none of my contacts or settings were there because i had to set it up as a new phone while i was downgrading. Is there any way to get my contacts and everything i backed up on to my iphone? Any help would be greatly appreciated

[ksennette]

As you know I said I would wait a few days before jailbreaking the 1.1.3 so I waited until last night. I used this howto which was excellant. (http://planet-iphones.com/forums/index.php?topic=663.0) I originally saw it on MMI but that place is either so slow or is down, so I found the same poster "Sidetalker" at the site ref there.

I started with a restored phone at 1.1.3 I clicked off all my music, movies etc, till there was nothing on the phone but about 211 mb of other. So it is important to go back to 1.1.1 then to 1.1.2 jailbroken because it prepares the phone for the soft update to 1.1.3. I used this howto for the nates (http://planet-iphones.com/forums/index.php?topic=663.0)update which was better than his.

The downgrade to 1.1.1 then to 1.1.2 took me 70 minutes this morning without a hic cup.:smile: (Just a NOTE I only had 21mb of Other at this point)
The soft update took about 30 minutes of mostly waiting and great sucess:gasp::2cool:

After I got back to 1.1.3 my contacts were there and I had to enter all my password settings etc. I synced back my music etc. All plays well, all sounds well, my custom ringtones work and sound we.

When I jailbroke at 1.1.2 I had my Installer icon, the BSB icon and SSH, but after the 1.1.3 the Installer was there updated to 3.0 but the BSB & SSH were gone. I installed the SSH but it does not show on my springboard??

My locate button works great in maps with Tinman's work-a-round.

I don't know if there is a work-a-round for the summerboard etc yet?

That is about it, if you needs help using my methods above then post them here.:smile:


I started with a locked unjailbroken 1.1.3 phone. I followed all the downgrade instructions. I successfully got 1.1.1 working. I got as far as upgrading to 1.1.2, and itunes said unable to restore iphone error#1609. I tried to go back to 1.1.1, and got the same message.
I even tried restore and update and got the same message. What do i do now?

[Napoleon_PhoneApart]

alpine.
thats what I meant.
I remember seeing that change during the update.
But it still is refusing connection.

Have you installed BSD 2.0 and SSH?

[jacker28]

Does anyone know how i can get my contacts back??? like i said before, i had to set my iphone up as a new phone while i was downgrading from 1.1.3 because it said that you couldnt restore using the back up files from 1.1.3. I set up a new iphopne in a different name and now that i have upgraded to a 1.1.3 jailbroken phone none of my contacts are there and i dont know how to get them back since i set it up as a new phone. PLEASE HELP, THX

[ksennette]

Have you installed BSD 2.0 and SSH?
Yes i did.I used my vista machine(mistake). I successfully restored on my xp machine "whew", i was worried for a while. Lesson, Don't use vista. Use xp or mac.

[patrickj]

Does anyone know how i can get my contacts back??? like i said before, i had to set my iphone up as a new phone while i was downgrading from 1.1.3 because it said that you couldnt restore using the back up files from 1.1.3. I set up a new iphopne in a different name and now that i have upgraded to a 1.1.3 jailbroken phone none of my contacts are there and i dont know how to get them back since i set it up as a new phone. PLEASE HELP, THX

Do you still see your contacts in Outlook or whichever PC address book you use?

[jacker28]

Do you still see your contacts in Outlook or whichever PC address book you use?
I dont use any address books, i only had my contacts entered into my iphone, so is there any other way i can get my contacts back?

[nikeplayer222]

Can someone help a noob out and answer me a quick question lol. I want to jailbreak my iphone but i've been told it's not quite possible right now. I have 1.1.3. and i bought it with 1.1.2 out of the box. I have never jailbroke it before. Is it still possible for me to do it??

[cubbie5150]

The jailbreak is only applicable to iPhones purchased out of the box with 1.1.1 or lower...

Really? Good thing I wasn't impressed w/ 1.1.3 (& thus didn't see the reason for upgrading/jailbreaking yet) because I have a week 46 OTB 1.1.2 (jailbroken), & assume I have the 4.6 bootloader...

[nikeplayer222]

I can't downgrade to 1.1.2 and then just jailbreak that? i'm just screwed lol?

[Rockky]

hey!
you know no matter how many times I've tried I can't go from 'press' to settings/wifi etc..
it gets just a plains screen and have to power off to get any response
any ideas?!
have a serial 42 phone.
thanks

[ZipZap]

So if you have a OTB 1.1.2 phone with BL 4.6, that is already jailbroken, this process will not work?

Or must it be downgraded to 1.1.1 and the whole jailbreak process done again.

KNK, I am not sure where you started in the process. Did you have a jailbroken phone or did you start from 1.1.3 and had to downgrade to rejailbreak?

[KNK]

So if you have a OTB 1.1.2 phone with BL 4.6, that is already jailbroken, this process will not work?

Or must it be downgraded to 1.1.1 and the whole jailbreak process done again.

KNK, I am not sure where you started in the process. Did you have a jailbroken phone or did you start from 1.1.3 and had to downgrade to rejailbreak?


I started with a restored phone at 1.1.3 and then went back to 1.1.1 and up.

If your original phone is 1.1.2 obt and you are jailbroken now you can soft upgrade to 1.1.3 JB. Once there you can not go back.

[KNK]

I dont use any address books, i only had my contacts entered into my iphone, so is there any other way i can get my contacts back?

Your contacts are wiped out, tough lesson for not syncing to an address book.:gasp:

[KNK]

I started with a locked unjailbroken 1.1.3 phone. I followed all the downgrade instructions. I successfully got 1.1.1 working. I got as far as upgrading to 1.1.2, and itunes said unable to restore iphone error#1609. I tried to go back to 1.1.1, and got the same message.
I even tried restore and update and got the same message. What do i do now?


That error means your restore .ipsw is bad or corrupted. Delete them and download new ones and make sure ti change the zip file extension to the correct name.

Restore your phone and start again.

Also make sure when you are at the 1.1.2 step 21 make sure you hit Shift-click UPDATE and not restore, that was your problem.

[freeagent81]

As you know I said I would wait a few days before jailbreaking the 1.1.3 so I waited until last night. I used this howto which was excellant. (http://planet-iphones.com/forums/index.php?topic=663.0) I originally saw it on MMI but that place is either so slow or is down, so I found the same poster "Sidetalker" at the site ref there.

I started with a restored phone at 1.1.3 I clicked off all my music, movies etc, till there was nothing on the phone but about 211 mb of other. So it is important to go back to 1.1.1 then to 1.1.2 jailbroken because it prepares the phone for the soft update to 1.1.3. I used this howto for the nates (http://planet-iphones.com/forums/index.php?topic=663.0)update which was better than his.

The downgrade to 1.1.1 then to 1.1.2 took me 70 minutes this morning without a hic cup.:smile: (Just a NOTE I only had 21mb of Other at this point)
The soft update took about 30 minutes of mostly waiting and great sucess:gasp::2cool:

After I got back to 1.1.3 my contacts were there and I had to enter all my password settings etc. I synced back my music etc. All plays well, all sounds well, my custom ringtones work and sound we.

When I jailbroke at 1.1.2 I had my Installer icon, the BSB icon and SSH, but after the 1.1.3 the Installer was there updated to 3.0 but the BSB & SSH were gone. I installed the SSH but it does not show on my springboard??

My locate button works great in maps with Tinman's work-a-round.

I don't know if there is a work-a-round for the summerboard etc yet?

That is about it, if you needs help using my methods above then post them here.:smile:

i dont have no phone reception i lost it when i did the downgrade how do i get it back

[KNK]

i dont have no phone reception i lost it when i did the downgrade how do i get it back

What firmware do you have, where is it now. Unlocked? Which Guide??

When I downgraded to 1.1.1 you will see messages of no sim, no signal, you need to activate....forget those it is just intermed steps you go thru to get to 1.1.2 jailbroken.

[freeagent81]

What firmware do you have, where is it now. Unlocked? Which Guide??

When I downgraded to 1.1.1 you will see messages of no sim, no signal, you need to activate....forget those it is just intermed steps you go thru to get to 1.1.2 jailbroken.

i have firmware 1.1.3 jailbroken after doing the downgrade from 1.1.3 to 1.1.1 upgraded by to 1.1.2 then to 1.1.3 from fully restored 1.1.3 now i tried to download the winscp it just freezes is there any other way to activate my service

[KNK]

i have firmware 1.1.3 jailbroken after doing the downgrade from 1.1.3 to 1.1.1 upgraded by to 1.1.2 then to 1.1.3 from fully restored 1.1.3 now i tried to download the winscp it just freezes is there any other way to activate my service
It should have been activated at 1.1.2 I don't understand why you need winscp to activate.

You need to add the BSD Baseband and the open SSH and services to maintain that. I do not know what all you have done.

[x666x]

For the record, if you upgrade your phone through iTunes to 1.1.3, it flashes your baseband to new settings. These new settings are not compatible with 1.1.1 or 1.1.2, and as a result, you will receive a SIM warning from the phone, and not have connectivity to your network until the OS software has gone back up to 1.1.3.

I have read that there are ways to revirginize your baseband, however it requires that your iPhone fall within certain manufacturing specs that I'm unaware of at the moment.

John's thread on Jailbreaking on Mac has a section about the baseband and downgrading it. You may want to check it out if this is your problem and you wish to stay on 1.1.2.

If this is not your problem, then you need to place a stock Lockdownd file back on your phone, this is from another thread:

13. Transfer lockdownd chmod 777
• Install WinSCP to your PC and launch it. Or CyberDuck on Mac.
• Go into your settings app on your phone and find out your phones IP address.
• For Mac Users, in CyberDuck press the Bookmarks button, followed by the + button to add a new bookmark. Name the Bookmark, for Protocol select SFTP (SSH) from the pulldown menu. Enter your iPhone's IP for the Server, set username to root, and use alpine as the password when prompted.
• For PC Users, in WinSCP click on NEW, type in your phones IP in the Hostname box, username is root, password is alpine. You can then click on the advanced options and connections and set the timeout to 60 seconds. Click Save. Click Login.
• After about 30-45 seconds or so you'll be prompted with a message, just hit OK. You should now be looking at your phones file system.
• For PC Users, in WinSCP, on the left side, navigate to the directory where you downloaded the lockdownd file. On the right side of the window, navigate to /usr/libexec.
• For Mac Users, browse to /usr/libexec in CyberDuck, in Finder browse to where you saved the lockdownd file
• Rename the phone version of lockdownd to lockdownd_old. Drag your new lockdownd file into this directory.
• Right click on the new file you just transfered over to your phone (right side window), goto properties (Get Info on Mac) and set the permissions to 0777, or just click all the check boxes in the first, second, and third columns. Hit OK, and then verify this just incase.
• Disconnect your phone, close iTunes, Reboot your phone.
• Open iTunes and then connect your phone. iTunes should instantly activate your phone.

[freeagent81]

It should have been activated at 1.1.2 I don't understand why you need winscp to activate.

You need to add the BSD Baseband and the open SSH and services to maintain that. I do not know what all you have done.

is the IP address the IMEI number or the ICCID number?